Before calling for a "final electrical inspection" the following is required:
1.) All appliances, fixtures, outlets, panels, switches, etc. must be installed.
2.) All electrical wiring must be complete.
3.) The panel index must be complete (i.e., the legend located on the electrical panel door that shows which overcurrent device controls the specific appliances or lighting circuits).
I challenge anyone who is involved in the inspection process who would give a "FINAL" electrical inspection when the above simple list is not followed!
Look at the results of a search for "Final Electrical Inspection" on Google: http://www.google.com/search?hl=en&lr=&q=final+electrical+inspection&btnG=Search
The results show where the subject of a final electrical inspection is covered in the rules where building departments give their requirements.