Isn't it appropriate to answer questions from an unqualified person who wants to do electrical work the same way you would another tradesman? Like—"Article 250," “conductor reidentification,” “ground electrode” or "310-16 correction factor"? Most all of are familiar enough with the NEC to reference as an accepted standard—essentially a baseline set of conditions that you, your peers and seniors accept or at least use as a basis for argument.
Should dull-witted moochers be treated any different? Suggest that you value your training and do not care to contribute their feigned expertise, but maybe those who sport the nice orange aprons might be happy to.
I used to snicker going into a spacious home-repair chainstore that had a coil of 14/4 SEOW on a heavily traveled end-of-aisle shelf, along with a shelf tag of “14/3 Romex”—priced at probably one-fourth of their cost. I’d point out the obvious mislabeling on occasion and only after several tries on a number of trips did I find a trainee manager that had enough sense to so much as consider my comment. Heaven help them if someone called to check stock on a hundred feet of inch-and-a-quarter electrical metallic tubing.