Hi,
What do you charge for a 100 or 200A service installed at a single family dwelling? Does not include PERMIT.
Here is a material list and what I charge:
Equipment is GE.
100A - $750
---------------
1 Weatherhead (5 hole) 1 1/2"
15' Conduit (IMC) 1 1/2"
1 Meter base 100 Amp
1 Nipple (2 1/2" to 4" long)1 1/2"
2 Locknuts 1 1/2"
1 Plastic Bushing 1 1/2"
1 Main breaker 100 Amp
1 Weatherproof breaker box 100 Amp
1 Hub for above breaker box 1 1/2"
22' Neutral Conductor #6 AWG
86' #2 THW Conductor (copper)for line and load side
4 Conduit straps & screws 1 1/2"
4 Lag screws 3/8" X 3"
1 Roof Flashing 2-1/2"
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.
200A $1100
------------
1 Weatherhead (5 hole) 2 1/2"
15' Conduit (IMC) 2 1/2"
1 Meter base 200 Amp
1 Nipple (2 1/2" to 4" long)2 1/2"
2 Locknuts 2 1/2"
1 Plastic Bushing 2 1/2"
1 Main breaker 200 Amp
1 Weatherproof breaker box 200 Amp
1 Hub for above breaker box 2 1/2"
22' Neutral Conductor #4 AWG
86' 3/0 THW Conductor (copper)for line and load side
4 Conduit straps & screws 2 1/2"
4 Lag screws 3/8" X 3"
1 Roof Flashing 2-1/2"
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.
Let me know what you charge and what you think about these prices.
Thanks
Mustang
[This message has been edited by mustangelectric (edited 09-19-2004).]
