ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
A 5-20(20a) receptacle is legal on a 15a circuit?
by libellis - 10/10/21 12:46 PM
GFCI's pops in large numbers
by dsk - 10/07/21 03:46 PM
Backup Generator Done Right
by timmp - 10/06/21 02:07 PM
How's all our Non-US folks doing?
by dsk - 09/30/21 05:06 AM
Well I am back to stay (nearly 6 years)
by Bill Addiss - 09/26/21 11:09 PM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
1 members (Scott35), 10 guests, and 22 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Feb 2004
Posts: 115
H
Haligan Offline OP
Member
Connected 2 Cree 4" LED cans to dedicated circuit. Powered on, checked placement and operation. Switch off, breaker off.
Come back almost an hour later. Test with voltage pen to make sure no one warmed anything up while I was away. Surprise- there's voltage. Woah.

I put the meter on the hot and neutral of the lights and there is a steady 63v trickling back down from the two lights.

I then disconnected hot, neut, and gnd from circuit. Nothing but the two LED cans.
Still the 63 phantom volts.

What's happening here? It sounds like capacitance draining backwards.

I didn't think to put the ammeter on there.

Joined: Jun 2004
Posts: 1,273
T
Member
Use analog meter...

Voltage will disappear.



Tesla
Joined: Feb 2004
Posts: 115
H
Haligan Offline OP
Member
I had no idea. Too much trust in all things digital.


Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
sparky66wv
sparky66wv
West Virginia
Posts: 2,236
Joined: November 2000
Top Posters(30 Days)
dsk 5
Popular Topics(Views)
284,568 Are you busy
217,279 Re: Forum
203,631 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5