1 members (Scott35),
414
guests, and
29
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Aug 2003
Posts: 1,374
Moderator
|
Beware of things made in October...
Ryan Jackson, Salt Lake City
|
|
|
|
Joined: Nov 2002
Posts: 134
Member
|
That's one of those old 135 amp breakers RSlater, RSmike
|
|
|
|
Joined: Oct 2004
Posts: 806
Member
|
So, is it really 35 amps on the left? Was it sent to a breaker rebuilder for testing? The mind wobbles.. Put it up on eBay as the world's first dual-rated breaker, lol.
Stupid should be painful.
|
|
|
|
Joined: Nov 2001
Posts: 745
Member
|
It's actually a 67.5 amp breaker... 100 + 35 = 135, divided by 2 = 67.5 Mike (mamills)
|
|
|
|
Joined: Dec 2000
Posts: 4,294
Member
|
Put it up on eBay as the world's first dual-rated breaker To get top $$, be sure to tell them that you can see the image of Mary on the handle tie, too.
|
|
|
|
Joined: Aug 2001
Posts: 7,520
Member
|
So who's going to volunteer to test this contraption and find out the rating? Excuse me.... Make that rating s......
|
|
|
|
Joined: Feb 2005
Posts: 693
Member
|
Okay, let's get serious. (yeah, right!)
First thing I'd do is see if the two (yes, two) bodies are factory riveted together. The common trip is a little rectangle of metal that links the two mechanisms.
This may be a mistake or a home-brewed hybrid.
One of the handles may be incorrect, or it may actually be mismatched capacities. If not marked individually, only testing can tell for sure otherwise.
Larry Fine Fine Electric Co. fineelectricco.com
|
|
|
|
Joined: May 2005
Posts: 706
Member
|
There are some light areas around the 35. It looks like a Photoshop job.
Dave
|
|
|
|
Joined: Dec 2000
Posts: 4,294
Member
|
This picture was discussed a little on Wednesday night's chat. One of the comments was: "At least nobody's claimed it was a Photoshop job yet" Dave, if Roger put it up I will guarantee that it's real, and not a Photoshop Farce.
|
|
|
|
Joined: May 2002
Posts: 1,716
OP
Member
|
Dave, that is where I tried to clean it up and highlight it to get a better shot. This breaker is as it it is shown, it has no signs of having been tampered with, it is simply a manufacturers goof. It was a main breaker in a load center, and as far as I know it didn't have any problems as far as nuisance tripping, this leads me to think it was indeed a 100 amp breaker with a 35 amp handle on the left side. Edit for a P.S. Thank you Scott Roger [This message has been edited by Roger (edited 09-22-2005).]
|
|
|
Posts: 356
Joined: August 2006
|
|
|
|