ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
How's Florida doing with Hurricane Ian?
by Bill Addiss - 09/28/22 12:41 PM
Tough being a lineman's kid
by Bill Addiss - 09/28/22 12:39 PM
GFCI's pops in large numbers
by dsk - 09/26/22 04:35 AM
AFCI’s Revisited
by sparky - 09/24/22 09:58 AM
NFPA Price Increase Coming
by Bill Addiss - 09/23/22 02:22 PM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
0 members (), 31 guests, and 17 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#89991 10/26/04 11:08 PM
Joined: Feb 2004
Posts: 494
M
Member
Hi,
Any restrictions on installing UF cable under a pool apron? Not under the pool itself.

Looking at running switch legs under 6 inch apron around pool.

Feeder from sub panel on side of house will be in PVC...insulated ground and neutral..#8 from pool steel and it is insulated...did see that the pool guy just wrapped the wire under a nut on a 3/8 stud..that did not look too good but i am not doing that part..just tieing in the ground from the pool steel to the egc from the sub..any prob with that?

i thought i read somewhere that any runs under a pool had to be in conduit..my memory aint what it used to be..

thanks for any replies...

-regards

Mustang

Stay up to Code with the Latest NEC:


2020 NEC & Related Reference & Study Guides
2020 NEC & Related Reference & Study Guides
Pass Your Exam the FIRST TIME with these Exam Prep Combos:
 

>> Master Electrician Exam Prep     >> JourneyMan Electrician Exam Prep
 

Joined: Apr 2001
Posts: 518
J
Member
I can't speak for the code, but...

I advise against it, because I currently have a customer whose pool apron covers a bad wire run. Since UF was used, replacing this wire is almost impossible to replace this wire, without tearing up the apron.
Also, im my experience, trenches are NEVER deep enough, and UF is almost always run way too shallow.
Run pipe, then transition in a ground box once past the apron area.

Joined: Apr 2001
Posts: 507
G
Member
Mustang,
Where do these switchlegs go??

AFAIK there is nothing that would keep you from putting UF under a pool deck. However, I don't think I'd go that route unless there was no other option. It definitely would be better to go with pvc conduit.

Joined: Feb 2004
Posts: 494
M
Member
Hi,
Thanks for the reply. I think you are right and I will go ahead and do this whole job in pvc.

the switches will be controlling the wet niche lighting and 4 coach lights fed from a gfi..

i can easily justify the cost difference..

thanks for taking the time to reply..

-regards

mustang

Joined: Jul 2004
Posts: 9,745
Likes: 13
G
Member
You are also supposed to be 5' from the pool if space is available 680.10


Greg Fretwell

Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
timmp
timmp
Leo, IN, USA
Posts: 28
Joined: June 2004
Top Posters(30 Days)
dsk 3
Popular Topics(Views)
297,513 Are you busy
228,329 Re: Forum
213,217 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5