ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals

>> Home   >> Electrical-Photos   >> Classifieds   >> Subscribe to Newsletter   >> Store  
 

Featured:

 Electrical
 Clearance

 *
 Tools
 *

 Books

 *

 Test Equipment

 

Recent Gallery Topics:
What in Tarnation?
What in Tarnation?
by timmp, September 10
Plumber meets Electrician
Plumber meets Electrician
by timmp, September 10
Who's Online Now
0 members (), 393 guests, and 13 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#83427 01/30/03 06:46 PM
Joined: Mar 2001
Posts: 2,056
R
Redsy Offline OP
Member
A new home has a single receptacle for the washing machine. The owner has been unplugging it to use the iron. The laundry sink is next to the washer (obviously). GFCI protection is not called for in 210.8. The receptacle can be replaced with a duplex. Should a GFCI be installed, anyway?
(I'm thinking yes.)

Work Gear for Electricians and the Trades

Workgear for Electricians

#83428 01/30/03 10:40 PM
Joined: May 2001
Posts: 552
T
Member
GFCI gets my vote !


Donnie
#83429 01/30/03 10:48 PM
Joined: Apr 2001
Posts: 41
S
Member
i second that motion gfci being that they are using the receptacle for iron next to sink how close to sink is receptacle??

#83430 01/31/03 04:14 AM
Joined: Aug 2002
Posts: 1,081
T
Member
...and how close is the iron to the sink!!!

Does a washing machine tend to trip GFCIs?

#83431 01/31/03 07:43 AM
Joined: Mar 2001
Posts: 2,056
R
Redsy Offline OP
Member
The sink is next to the washer. The iron will only be as far as the cord will allow.
I know the thoughts behind GFCI on washers & refrigerators, but I've also heard that the motors are required to pass strict ground leakage tests, which would keep the "trickle" belolw GFCI thresholds.
That said, I'd rather try a GFCI on a washer than a refrigerator where the food would spoil if a tripped GFCI was left unnoticed.

#83432 01/31/03 07:51 AM
Joined: Oct 2000
Posts: 5,393
S
Member
I'd vote yes also, with consideration of placement.

It would be nice to have the GFI visible above the washer, or a nearby GFI breaker in the panel.

just a thought......

#83433 02/03/03 11:39 PM
Joined: Jan 2003
Posts: 40
E
Member
All I can think is that Water + Electricity = GFCI. A little CYA goes a long way.


Pete
Work Gear for Electricians and the Trades

Workgear for Electricians

#83434 02/04/03 02:49 PM
Joined: Dec 2001
Posts: 270
E
Member
The outlet is readily accessible and its normal use is for both ironing as well as for the washer. I don't see any way around the requirement for garage outlet gfci protection. If its not in the garage, then I don't see any requirement for a gfci. But I would put one in anyway!

#83435 02/22/03 08:30 AM
Joined: Mar 2002
Posts: 125
S
Member
I have a GFI on my washing machine. I've lived here for two years and have not had it trip once. Hope this helps with your decision.

#83436 02/22/03 03:27 PM
Joined: Feb 2002
Posts: 2,233
H
Member
If the question comes down to A) Is it required? or B) Would I install a GFCI? Then most people who know the dangers of electricity would put the GFCI in this location. However it might not be required as per the NEC.

Page 1 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5