ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Happy Thanksgiving all!
by gfretwell - 11/30/22 05:55 PM
EMC Glands on Motors
by gfretwell - 11/30/22 05:53 PM
Ground Rods: Installation and Hook-Up
by gfretwell - 11/30/22 05:45 PM
Colt Firearms Switchbox
by NORCAL - 11/29/22 01:04 AM
Perfect work light?
by gfretwell - 11/22/22 12:48 AM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
1 members (Scott35), 16 guests, and 11 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 3 1 2 3
#55024 08/14/05 11:46 AM
Joined: Aug 2005
Posts: 21
S
Member
Again, I didnt giver advice to anyone on here as it kind of looks like one of the major qualifications to come on here must be arrogance. Somehow we seem to think the green wire would actually know the difference if the guy thqat hooked it up had a licence in his pocket or not. Do you treat all new people here like this? When you point out that I have given some wrong tech advice than you have a valid point about not being qualified.

#55025 08/14/05 01:03 PM
Joined: Oct 2000
Posts: 4,080
Likes: 3
Member
sberry27,

No one here will tell you there aren't incompetent people out there with Licenses. There's good and bad everywhere. The unqualified, and/or unlicensed (and uninsured) people doing work for others is all bad news.

You didn't mention anything about yourself, so remarks can only be speculation, but many would consider it more than a bit arrogant for a DIYer to join a Forum full of ECs and make their first post in support of DIY & Handymen and complaining about ECs. Before you complain any further please think about that.

Bill


Bill
#55026 08/14/05 01:13 PM
Joined: Dec 2004
Posts: 1,064
D
Member
For what it is worth..........

sberry27 is new to this board, however he has been a Kiess's board for quite some time.

(I read alot of different boards)

He is actually very knowlegable and very friendly there, and might I add very helpful.

Let's all not bash anyone, but instead welcome him here, he may help one of us out at some time........

Sberry27, Welcome.......


Dnk.........

#55027 08/14/05 01:16 PM
Joined: Apr 2005
Posts: 65
G
Member
Sorry Mr. strawberry, I just wanted to know if a person with your point of view had any experience to back it up. Even if you were a doctor, lawyer or an engineer from NASA there are those of us that would wonder where you came in contact with all of these incompetent electricians. When I find mistakes made in the field it is normally done be someone playing electrician ( Joe the guy that worked maintenance at the apartments down the street). When I find a hack job, I will ask for the name of the contractor that did the work. I have yet to find a legitimate contractor named. The green wire does not know who hooked it up and if it is hooked up properly no one will ever know. People are allowed to legally do many types of electrical work without a license ( home repairs by owner, maintenance both commercial & industrial as an employee )but when they go in the field and advertise thier services as a qualified electrican, they are stating that they have a certain level of competence and in my opinion the honor system doesn't work. Without a license a person can not get a business license and without a business license they can't purchase insurance. It's the same with a driver's license, there are many people that don't drive repsonsibly but if you are injured in an accident you hope the other driver has a license and insurance. If you want to do your own work I don't think anyone cares but if you are trying to justify handymen by saying that there are a few incompetent electricians with a license that dog wont hunt. If that logic was sound we would have to open up all professions and tomorrow I'm doing surgery because it pays better than electrical work.

#55028 08/14/05 01:46 PM
Joined: Apr 2001
Posts: 449
F
Member
growler,
I would have to disagree with you, at least in my neck of the woods. The majority of poor quality and code violation work I come across was performed by outfits carrying a license. Here are some recent examples and I'll let you decide if they are poor quality/code violations.
#1)Stone parking lot with 30' pole lights newly installed by a licensed "master electrician". Poles fed with #2 AL URD burried less than 12" below stone. #2 AL URD spliced inside hand hole to #10 THHN using big blue wirenuts. No EGC anywhere.
#2)8' HO fluorescent shop lights installed in a light manufacturing facility suspended from the bar joists with nylon tie straps and fed with orange 16ga extension cord daisy chained from a j-box. Both of these jobs were done by 2 different "licensed master electricians" and inspected by an inspector who doesn't know what he's doing and trusts the "master electrician" does. Both of these jobs cost top dollar(more than I would have charged). Most homeowners and business owners in my area have been scared out of using unlicensed handymen by their insurance carriers. Sadly, around here, a license gets you automatic approval on jobs without an informed inspection.

#55029 08/14/05 03:58 PM
Joined: Mar 2005
Posts: 1,803
Member
Sberry 27, Welcome to the Forum. Most of the men and ladies at ECN are engaged as professional electricians trying to earn a living at their trade. Many, many threads and posts here reflect their anger at the practices of 'handy-men', 'hacks', and other unqualified persons doing 'electricians' work' at rates of pay which a qualified tradesman with all the overhead of a proper, legal business cannot fairly compete against. These guys are, quite rightly, much angered by this situation. The fact that some handymen can do a good job in some circumstances, or that there are diy people with relevant good skills, or even that there are licensed idiots about, is irrelevant. The fuse you lit exploded as anger about the unfair competition and the dangers it creates. Nothing personal; not that you are new; not that you aren't "in the trade" and in agriculture - in fact, exactly the opposite - many new members get amazingly patient and caring responses to sometimes quite inane questions. I look on here, (as a mere bystander), amazed at the complexities of the US Code and the depth of know-how required to cope with it in the field. No handyman, IMO, can ever do much more than wire up receptacles, do simple switching and fit luminaires etc. Present them with anything more complex, like safe sizing of conductors, safe grounding, phase shifts, safe working practices, starting single/multiphase motors, number of receptacles required by Code, correct breaker sizes and specifications, fitting smoke alarms, number of conductors in a conduit, etc.,- ( one could go on all day ), and the holes in their amateur knowledge immediately expose an unknowing (or cheapskate) consumer and others to danger, which can't be right, can it?. The sheer trillions of man-hours experience and logic, distilled into Code, enshrined within the law and diligently practiced by qualified men, weren't executed in order to create a monopoly for a minority Guild to hold the consumer to ransom- they were put in place to provide for his safety and that of third parties, such as children, passers by and Firemen. In general, they do just that.

Alan

[This message has been edited by Alan Belson (edited 08-14-2005).]


Wood work but can't!
#55030 08/14/05 04:00 PM
Joined: Apr 2005
Posts: 65
G
Member
Fred, what does it take to become a licensed master in that part of Indiana. I have tried to find the information but it's not easy. It appears that Indiana does not have a state license so how do they determine who is qualified to have a license. A license without certification is the same as no regulation at all. When I was young I lived in a couple areas where you could buy a local license for $25. If find it hard to believe that a master electrician would feed a light fixture with an extensiion cord so if figure he must have gotten his license from a Cracker Jack box. There are areas of the country where the wild west is over and the inspections are for real.

#55031 08/14/05 04:24 PM
Joined: Aug 2005
Posts: 21
S
Member
"but if you are trying to justify handymen by saying that there are a few incompetent electricians with a license that dog wont hunt"
No, I agree, I am absolutely not justifying the incompentant to do the work. It was just kind of my point that not every crummy installation I have ever ran across was done by a handyman type. I think as a trend the people found on these boards, even the DIY are very conciencious. The DIY boards are full of "want to do it right" types.

#55032 08/14/05 04:44 PM
Joined: Jan 2003
Posts: 1,429
L
LK Offline
Member
Ok 90% of wiring problems come from Hacks and DIY, however, this last week:

Monday: We arrive at job, no power, after checking, we find service conductor at main breaker open, after checking we find they spliced the service conductor in buried pipe, first clue was rigid conduit on one end and EMT on the other, yes buried EMT, so we asked the owner if he knew who did this job, yes let me get you the invoice, well it happened to be a well known area EC, and one that complains about hacks, doing business in his area.

Wednesday: Service upgrade estimate, we get there, look it over, give estimate, oh that is too much Mr Other EC said he can do it for Less, and there is no need to change the meter pan, and he said i don't need any additional grounding or bonding, and another thing He said you don't need a permit for this, Mr Other EC is another one that complains about Hacks working.

Yes most of the dangerous work does come from DIY's and Hacks, but there is some coming from within the trade.

#55033 08/14/05 04:46 PM
Joined: Aug 2005
Posts: 21
S
Member
There is a question I do have here and it is,, how do some of the mobile homes pass inspections? I know they are mostly made in states like Indiana but they are shipped to other states where they wouldnt pass, mostly for things like box fill. I have seen small boxes behind light fixtures used as junctions for gobs of wires, packed so tight that they had to screw the fixture down on them and several with entrance panels in the back of closets. Maybe newer ones have cleared this up but they wouldnt have met clear working area, etc. I saw a new modular with no provision for lights switches at the top of stairways, etc.

Page 2 of 3 1 2 3

Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *
2023 National Electrical Code (NEC)
2023 NEC Now Available!
 
* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
TOOL_5150
TOOL_5150
Bay Area
Posts: 61
Joined: August 2007
Top Posters(30 Days)
Trumpy 7
NORCAL 5
Popular Topics(Views)
300,340 Are you busy
230,001 Re: Forum
214,810 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5