ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
EMC Glands on Motors
by Trumpy - 12/01/22 06:12 AM
Ground Rods: Installation and Hook-Up
by Trumpy - 12/01/22 05:54 AM
Happy Thanksgiving all!
by gfretwell - 11/30/22 05:55 PM
Colt Firearms Switchbox
by NORCAL - 11/29/22 01:04 AM
Perfect work light?
by gfretwell - 11/22/22 12:48 AM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
0 members (), 30 guests, and 11 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Mar 2003
Posts: 52
D
Dapo Offline OP
Member
I saw a brochure outlining the use of the Crouse Hinds Cam-lok connectors http://www.tmb.com/Pdf/Cam-Lok.pdf
I was wondering if there is any restriction on where they can be used and who can connect equipment using them?

I looked at a 315 amp connector and noted that you could touch the brass pin and socket with your finger when the plug was apart.

The other worry I have is even though the connectors are colour (Australian Spelling) coded they are interchangable. So that a green plug can be plugged into a red socket.
Or an earth connection could be inadvertantly left off.

So when these connectors are used, is there a stipulation to ensure only licensed electricians can use them?


I have personally only seen these connectors used once here in Aus are they in common use in the states?

Joined: Jan 2003
Posts: 4,391
I
Moderator
I have only seen them used in the US for traveling distribution equipment.

Carnivals, Concerts etc.

They are kind of scary as they get worn they do not 'loc' anymore, the roadies fix that with gaffers tape.


Bob Badger
Construction & Maintenance Electrician
Massachusetts
Joined: Jun 2001
Posts: 161
M
Member
Check out 520.53(K) & (P). Also, there is a movement among many companies to make the EGC and grounded conductors reversed. So, at the company switch you would have the EGC and grounded conductor as a male connector and the phases as a female.
Qualified personnel should realize to retire a connector that won't lock... then there's reality.
Notice that it says "Qualified Personnel" not "Licensed Personnel"...
Depending on the situation we will add colored electrical tape to the connector to use it as another conductor type, such as using a black as a red when the red I was going to use is damaged from someone droppiing it off a truck...
Did you also see the tees?
Crouse Hinds now makes a fused safety switch + Cam-Loc combo for company switch applications right off the shelf instead of having to cobble them together out of different parts. also, check out the Crouse-Hinds Posi-Lok system.


Mike Wescoatt

Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *
2023 National Electrical Code (NEC)
2023 NEC Now Available!
 
* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Alan Belson
Alan Belson
Mayenne N. France
Posts: 1,803
Joined: March 2005
Top Posters(30 Days)
Trumpy 9
NORCAL 5
Popular Topics(Views)
300,393 Are you busy
230,033 Re: Forum
214,833 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5