ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Wire sizing
by gfretwell - 10/21/21 10:12 PM
GFCI's pops in large numbers
by dsk - 10/21/21 02:03 AM
Need some info on Japanese outlets, 200V 15A
by andey - 10/20/21 08:05 AM
nec 110.3 (B)
by watersparkfalls - 10/19/21 07:09 AM
A 5-20(20a) receptacle is legal on a 15a circuit?
by libellis - 10/10/21 12:46 PM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
1 members (Sonicfan20), 16 guests, and 23 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#213974 09/15/14 03:37 PM
Joined: Apr 2002
Posts: 7,282
Likes: 3
Member
Found this on a walk thru. One of many
[Linked Image]


John
Joined: Jul 2004
Posts: 9,668
Likes: 6
G
Member
Was this in a box or just a yoke screwed into the drywall?


Greg Fretwell
Joined: Apr 2002
Posts: 7,282
Likes: 3
Member
It's a shallow wiremold type box. There are quite a few others. This is a countertop; the appliance is a microwave.
The source of the NM is a male cord cap in a duplex behind the cabinet.

Male cord cap, cord to a wiremold box with a GFI/receptacle.

Basically, an attempt by a handyman/maintenance man.


John
Joined: Dec 2001
Posts: 2,492
T
Member
Let's ask the other way round: what of the stuff we see here is actually acceptable according to the NEC and to your local code?

Stapling cable to the wall would be perfectly acceptable here, feeding fixed installations with cord and plug too, although only if proper strain relief is provided. Of course the angle plug with half-torn cord is inacceptable just about anywhere.

Joined: Apr 2002
Posts: 7,282
Likes: 3
Member
Tex:
None of what is in the pic is compliant with the NEC.

NM as in the pic must be protected from physical damage. Using cord for permanent wiring methods is non-compliant. The EGC (Equipment ground conductor) must be present and connected properly. Polarity must be correct.

'Cord caps' do not provide proper strain relief and are not listed for #12 NM (solid conductors). The angle plug is a factory item on the microwave.

Going deeper into it, box fill, cable entry, etc. could be addressed, but....why beat a dead horse.

This is in the laundry area; others are in vending areas, and guest laundry areas & fitness room of a 100+ room hotel.

All is the "quality" electrical work of the maintenance guys!

It will be corrected to compliance, as the property is being sold.


John
Joined: Dec 2001
Posts: 2,492
T
Member
I might miss a few points here. Where's cord used for permanent wiring? I see the two NM cables coming up, presumably feeding the receptacle and another downstream.

Then there's the poorly terminated grey cord that I thought was connected to a microwave.

All the points you mentioned make a whole lot of sense (although not all international codes are as strict) but I've got trouble spotting them in the picture. The whole setup does look hideous!

Joined: Apr 2002
Posts: 7,282
Likes: 3
Member
Tex:
The cord issue is not visable in the pic, I have another pic of the cord issue. I'll post is asap.


John
Joined: Apr 2002
Posts: 7,282
Likes: 3
Member
Tex:
The cord is visable in this pic.

The NM (romex)in the first pic is a tap via acord cap in an outlet in the back wall of thebase cabinet. Sorry for the confusion.

[Linked Image]


John
Joined: Apr 2002
Posts: 7,282
Likes: 3
Member
Tex:
NEC Article 400 covers cord applications. 400.7 and 400.8 are the permitted uses for cord, and the prohibited use of cord.

The exhaust fan is wired with cord which is 'sleeved' in EMT. The yellow cord plugged into the receptacle is a rather nice 100' HD extension cord that powers a small fan that the laundry ladies use to help keep cool.

Also, the BX/MC cable that is tapped off of the circuit behind the emergency light requires straps to the wall.



Last edited by HotLine1; 09/17/14 10:03 PM.

John
Joined: Jul 2004
Posts: 9,668
Likes: 6
G
Member
This is what I found in my kid's house, after they got a clean bill from a home inspector.

Water heater hook up

[Linked Image from gfretwell.com]

Light kit on the fan

[Linked Image from gfretwell.com]

Closet light. On off? turn the lamp.

[Linked Image from gfretwell.com]


Greg Fretwell
Page 1 of 2 1 2

Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
richard
richard
L.I. New York
Posts: 99
Joined: August 2003
Top Posters(30 Days)
dsk 6
Popular Topics(Views)
284,731 Are you busy
217,352 Re: Forum
203,702 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5