ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Grounding electrodes
by gfretwell - 09/07/21 03:41 PM
Looking For Electricians in the Midlands
by Alex247 - 09/06/21 05:26 AM
Backup Generator Done Right
by timmp - 08/31/21 04:44 PM
New in the Gallery:
Now you know.
Now you know.
by Tom_Horne, September 7
February, North East Indiana
February, North East Indiana
by timmp, July 25
Who's Online Now
0 members (), 31 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#213197 03/29/14 12:00 AM
Joined: Oct 2000
Posts: 3,666
Likes: 1
Admin Offline OP
Administrator
Member
submitted by Brad R:

[Linked Image from electrical-photos.com]

[Linked Image from electrical-photos.com]


2017 / 2014 NEC & Related Books and Study Guides
Admin #213198 03/29/14 12:10 PM
Joined: Apr 2002
Posts: 7,279
Likes: 3
Member
Looks like the garden hose goes thru the plywood and is ready for any fire incident.

Seriously, was a suitable box and cover out of the budget?


John
Admin #213199 03/29/14 01:26 PM
Joined: Jan 2005
Posts: 5,316
Cat Servant
Member
Not only was a suitable box out of the budget, it was beyond the imagination of the installer.

I see this method all too often. Truth be told, the lack of a box probably the one of the lesser violations.

First, notice how the cable goes through the wood panel.Did you pause to wonder why? I'll take a guess here, and say this house is an older home, one built without laundry facilities. My own 1957 home was built with only a washer hook-up in the carport, and no provision for dryer.

Folks often decide to move the laundry a porch, or indoors, and add a dryer. The dryer will use a surface-mounted, cord connected receptacle like this: http://img.rakuten.com/PIC/16310526/0/1/500/16310526.jpg It will be fed by a cord passing through a hole in the floor.

IMO, the cord to be in the wall cavity, and secured (as this example is surely not secured at all).

Follow the cord, and you will find it tied into one of the existing 240v lines- the power for the water heater range. I often find all three tied into the 30-amp water heater circuit. The connections are made without boxes, the so-called "flying splice."

While you're under the house, look to the drain line for the washer and the dryer vent. Both commonly just dump their contents under the house.

IMHO, I maintain that the only proper materials to use for mounting receptacle are a DEEP 4-11 box, with either a double mud ring (recessed mounting) or industrial cover (surface mount) and a proper 2-screw cable clamp. No other combination gives you enough space to work with the wires.

Usually, though, the an will cram it into a plastic box, remove the "clamp," and push his "pigtails" back into the wall cavity.


Admin #213200 03/29/14 01:40 PM
Joined: Mar 2004
Posts: 947
T
twh Offline
Member
I love it! It makes all my work look so much better. Too bad drywall isn't strong enough to hold the screws or they could have saved money and used drywall.

I think that's a welder plug and an air hose. Maybe they have different rules for garages.

Admin #213205 03/29/14 03:08 PM
Joined: Apr 2002
Posts: 7,279
Likes: 3
Member
Ah, a welder outlet & air hose.
I can't read the plug plate, but 120 volt, (H-N-G).

I think Reno is on the right track, dryer outlet, be it 120 or 240 the 'lectrician will make it work.


John
HotLine1 #213217 03/29/14 08:15 PM
Joined: Jul 2002
Posts: 8,407
Likes: 2
Member
Wow!,
That's classy. grin

A welder plug and an air hose?
I'm thinking it could be for a plasma cutter.

Admin #213219 03/29/14 09:58 PM
Joined: Sep 2002
Posts: 910
Likes: 1
N
Member
Looks to be a 50A 250V receptacle, common type used for welders,my Lincoln buzz box & MillerMatic 251 MIG welder both came w/ that configuration plug, that "shiner" on the black conductor is really nice, but it goes with the rest of the poor workmanship as noted above.



Admin #213398 04/22/14 09:20 AM
Joined: May 2005
Posts: 247
T
Member
I think the "hose" is actually RG-6 coax. The diameter looks about right.

Admin #213751 07/06/14 10:53 PM
Joined: Nov 2002
Posts: 790
W
Member
Maybe he thought he was in Australia? :-) They don't use boxes there...

https://www.electrical-contractor.n...lia_wall_boxes_not_requi.html#Post212232

Admin #215607 06/08/15 12:23 PM
Joined: Jun 2003
Posts: 1,143
D
Member
When I updated my wife's grandmother's house it was full of examples like that. Want a ceiling light? Punch a hole, run the Romex and use wood screws to secure the fixture.

Page 1 of 2 1 2

Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
AllClear
AllClear
Belmond Iowa US
Posts: 44
Joined: August 2005
Top Posters(30 Days)
timmp 3
FGBY 2
Popular Topics(Views)
282,917 Are you busy
216,686 Re: Forum
203,109 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5