ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Danish type K Sockets
by winston_1 - 10/25/21 07:30 PM
Flexible Conduit?
by gfretwell - 10/24/21 01:59 AM
May I backfeed 3 phase transformer?
by dsk - 10/22/21 04:37 AM
Wire sizing
by gfretwell - 10/21/21 10:12 PM
GFCI's pops in large numbers
by dsk - 10/21/21 02:03 AM
New in the Gallery:
240/208 to a house
240/208 to a house
by wa2ise, October 9
Now you know.
Now you know.
by Tom_Horne, September 7
Who's Online Now
1 members (Scott35), 15 guests, and 18 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#206539 07/15/12 07:21 PM
Joined: Mar 2008
Posts: 47
sbi Offline OP
Member
Ok got a customer that Has a house that was broken into? The crooks took some of the wiring. They left it about 4-10 feet from the panel. Most of the rest of it is still in tack. They just basicaly took what little they could. That was by the panel.

My question is what will be the easiest way to re do this job and save the customer money.

Generaly when this happens they take all of it. I am just wondering what they code correct way of doing this is. I have a plan just wanted some feed back

Thanks

SBI


when in doubt jump it out
I happily work for slumlords
2017 / 2014 NEC & Related Books and Study Guides
sbi #206541 07/15/12 08:10 PM
Joined: Jul 2004
Posts: 9,669
Likes: 6
G
Member
Basically the main code issue will be to be sure all of the J boxes remain accessible.
Did the cut the wire or just pull it until it broke. The latter might make things a lot tougher.


Greg Fretwell
sbi #206542 07/15/12 08:17 PM
Joined: Mar 2008
Posts: 47
sbi Offline OP
Member
Both. Some looks cut with a knife. Some is pulled. I plan on replacing the stuffed that was pulled. I was thinking j boxes also. that seemed the only way with out a complete re wire.

I plan on using new wire going form each breaker to a box. make connections and be done. I am just concerned how it is going to look


when in doubt jump it out
I happily work for slumlords
sbi #206546 07/15/12 09:30 PM
Joined: Jul 2004
Posts: 9,669
Likes: 6
G
Member
It might be worth megging out all of the circuits that were damaged to be sure they did not damage the cable in the wall.


Greg Fretwell
sbi #206547 07/15/12 10:37 PM
Joined: Mar 2008
Posts: 47
sbi Offline OP
Member
Not sure if customer will pay for that little bit extra.
Plus my megger got stolen. By some one that I hope needed it more than I did


when in doubt jump it out
I happily work for slumlords
sbi #206548 07/15/12 11:04 PM
Joined: Jul 2004
Posts: 9,669
Likes: 6
G
Member
I was thinking more about the liability issue


Greg Fretwell

Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
CDS
CDS
Nicholson Ga
Posts: 34
Joined: June 2006
Top Posters(30 Days)
dsk 7
Popular Topics(Views)
284,911 Are you busy
217,452 Re: Forum
203,753 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5