ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
Top Posters(30 Days)
sparky 4
Recent Posts
Dimmable LED 2x4 lay in fixtures
by gfretwell. 12/13/17 09:49 PM
2017 NEC Changes
by sparky. 12/13/17 06:57 PM
Casino Wiring methods
by HotLine1. 12/09/17 10:44 AM
Ground wire Size to water Line.
by HotLine1. 12/05/17 12:11 PM
Flexible conduit to an outside Spa
by gfretwell. 12/05/17 12:28 AM
New in the Gallery:
Gallery Test
Popular Topics(Views)
243,045 Are you busy
179,480 Re: Forum
170,405 Need opinion
Who's Online Now
0 registered members (), 29 guests, and 10 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate This Thread
Page 1 of 2 1 2
#163502 - 05/09/07 05:22 AM PTO generator source  
pauluk  Offline
Member
Joined: Aug 2001
Posts: 7,520
Norfolk, England
I've been trying to find a source for a portable PTO (Power Take-Off) generator which can be coupled up to a tractor as and when needed: Single phase 240V, around 5kVA or so.

This is a little out of my usual field, and so far most of my searches have only turned up PTO generators of much larger sizes, typically 20kVA upward.

Any ideas for a source?


Test Equipment:
Large Selection of Test Equipment For Electrical, HVAC, Test & Measurement
Large Selection of Test Equipment For Electrical, HVAC, Test & Measurement

#163515 - 05/09/07 11:21 AM Re: PTO generator source [Re: pauluk]  
Alan Belson  Offline
Member
Joined: Mar 2005
Posts: 1,803
Mayenne N. France
Paul, I found Virtaucompany [which google] on e-bay US, selling a 13kw unit with PTO drive and gear-box, giving 50A x 240v, @ about £800+ ship. taxes etc. The problem is the PTO's 540 rpm, requiring a g/box of 3-1 on a 1500 rpm alternator or 6-1 on a 3000rpm unit, making a home-build very difficult.


Wood work but can't!

#163615 - 05/12/07 10:17 AM Re: PTO generator source [Re: Alan Belson]  
pauluk  Offline
Member
Joined: Aug 2001
Posts: 7,520
Norfolk, England
Thanks Alan. Since posting (sorry, been tied up for a couple of days!) we've also managed to find a farm dealership here selling Mec Calte generators. 13kVA unit which requires 435 r.p.m. is retailing at £1075 incl. delivery (big beastie, over 400 lb.). Comes complete with volt/amp/frequency meter set, C/Bs, etc.

It's bigger than he needs, but I think he's going to go for it and have the spare capacity.



#163624 - 05/12/07 02:28 PM Re: PTO generator source [Re: pauluk]  
frenchelectrican  Offline
Member
Joined: Feb 2003
Posts: 939
Wi/ Paris France { France for ...
Paul ;

you mean you found a pto genny that can run at 435 RPM ?? is that geared for 4 shoeed [poles] genny unless i am figureing the gear ratio wrong there i came up 3.44 gear ratio so i figured out that with standard 60 HZ it will be very close to standard speed there i came up 523 RPM[PTO speed]let me know

Merci , Marc

also i think they have 2 bearing gennys as well you can add on to just have to get right combation of gearing or belt pulley diamater that useally called belt driven genny they have smaller size as well

Last edited by frenchelectrican; 05/12/07 02:30 PM. Reason: add more genny info

Pas de problme,il marche n'est-ce pas?"(No problem, it works doesn't it?)


#163625 - 05/12/07 02:31 PM Re: PTO generator source [Re: frenchelectrican]  
renosteinke  Offline
Cat Servant
Member
Joined: Jan 2005
Posts: 5,316
Blue Collar Country
Maybe you're asking for the wrong thing? There surely are smaller PTO generators around .... many are called "welders."


#163667 - 05/14/07 06:28 AM Re: PTO generator source [Re: frenchelectrican]  
pauluk  Offline
Member
Joined: Aug 2001
Posts: 7,520
Norfolk, England
Originally Posted by frenchelectrican
you mean you found a pto genny that can run at 435 RPM ?? is that geared for 4 shoeed [poles] genny unless i am figureing the gear ratio wrong there i came up 3.44 gear ratio


I'm not sure if it is actually a 4-pole stator on the model in question, but the gear ratio sounds about right if it is to get 1500 r.p.m. (for 50Hz).

Unfortunately I don't have the full spec. sheet with me at the moment. I've heard that he's ordered the genny anyway (rush job, as usual!) and will be taking care of the mechanics. I'll just be going to do the wiring when it's all ready.

I know for sure he's not going to be happy when I tell him that for the load he has in mind it's definitely going to mean rewiring all the hookups, and probably going to involve running a heavier SWA feeder up to the main electrical "cabin."

He seems to think that all problems are solved by having "MORE POWER!" at the source. crazy



#163764 - 05/16/07 02:11 PM Re: PTO generator source [Re: pauluk]  
Trumpy  Offline


Member
Joined: Jul 2002
Posts: 8,223
SI,New Zealand
Guys,
Correct me if I'm wrong, but isn't the speed of the PTO shaft "adjustable" by which gear the gearbox is in?.
Or does the PTO come off a different set of gears inside the gearbox?.
Sorry, I haven't had a lot to do with tractors.


#163781 - 05/16/07 08:08 PM Re: PTO generator source [Re: Trumpy]  
frenchelectrican  Offline
Member
Joined: Feb 2003
Posts: 939
Wi/ Paris France { France for ...
Mike ,

Normally most PTO gennys have gearbox just like car or truck tranny is they will increase the speed from the tractor pto speed [ useally either 540 or 1000 rpm ] to correct speed what the genny is set up but there is some do have belt drive it can change the speed on the spot if need to.

Merci, Marc


Pas de problme,il marche n'est-ce pas?"(No problem, it works doesn't it?)


#163788 - 05/17/07 03:11 AM Re: PTO generator source [Re: frenchelectrican]  
Alan Belson  Offline
Member
Joined: Mar 2005
Posts: 1,803
Mayenne N. France
PTO rpm is set by the throttle. 540rpm seems to be the norm, but 1000 rpm can be optionally selected on most modern tractors, with a ratio-change effected by lever or by changing gearwheels.
You have to set the throttle to the necessary engine rpm to get your PTO speed. My Renault ticks over at 600rpm, develops full power, [30HP], at 1750rpm and 540 PTO speed is at 1500 engine rpm for instance.

But, a tractor diesel is governed for driving, that is +/- 10% on set speed. So at 1500 rpm idle, when a load is applied the engine will drop to, say, to 1350 rpm before the governor demands more power. On unloading, engine speed might rise to 1650 rpm before the governer reins in the engine speed. My Renault has an air-vacuum governor which might run out to +/- 15% on occasions.

A +/-10% governor regime is hardly ideal for electical generation. -4% to +0% is often specified for such work, but driving such a close-governed diesel in a vehicle would be virtually impossible, like riding a bucking bronco I'm told.

So unless there is some smoothing built into the alternator circuitry, the electrical quality could be very poor from this set up.



Wood work but can't!

#163795 - 05/17/07 11:29 AM Re: PTO generator source [Re: Alan Belson]  
pauluk  Offline
Member
Joined: Aug 2001
Posts: 7,520
Norfolk, England
I'd been informed that the generator was delivered a couple of days ago, so I went out there this afternoon to take a look at what would be needed to complete the installation.

He'd already got it coupled up to a tractor to try out:

[Linked Image]

Apparently the units he wanted to order were out of stock, but the place said they could do a deal on a 20kVa set for only a little more, so that's what he's got. What he's going to do with the spare power I have no idea, especially as the feeder from the barn to the loads at the moment is about 250 ft. of 4mm SWA and I get the feeling he's not going to like the price for upgrading to something which would actually make a 20kVa generator useful. Sometimes you get involved in jobs you wish you'd never seen..... frown

Anyway, the generator is 2-pole:

[Linked Image]

No idea what combination of gears are in the box to achieve the correct 6.98 ratio.

At least we have a full set of meters, but having seen the old tractor he intends using, I have to wonder, like Alan, about how good the speed regulation is going to be.

[Linked Image]


Page 1 of 2 1 2

Member Spotlight
lil suzi
lil suzi
Midwest
Posts: 57
Joined: August 2003
Show All Member Profiles 
Featured:

2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Shout Box
Powered by UBB.threads™ PHP Forum Software 7.6.0
Page Time: 0.024s Queries: 16 (0.005s) Memory: 0.8228 MB (Peak: 1.0067 MB) Zlib enabled. Server Time: 2017-12-14 20:45:23 UTC