ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
Does a 'normal 3ph-AC motor' include capacitors?
by gfretwell - 09/18/19 01:20 AM
Another weird NEC code question on Feeder Taps
by gfretwell - 09/18/19 01:14 AM
NEC 2017_392.22(B)(1)(b)
_What's the smallest width

by Bill Addiss - 09/17/19 07:13 PM
NEC Question_Cord-&-Plug EGC shorter then Neutral
by pcsailor - 09/16/19 05:26 AM
Another NEC 2017 Question_240/24VAC Txfr-Neutral R
by pcsailor - 09/16/19 05:22 AM
New in the Gallery:
What is this for?
Plug terminals
Who's Online Now
0 registered members (), 3 guests, and 10 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Business Blunders #158139 04/02/06 08:05 PM
Joined: May 2005
Posts: 706
T
Tiger Offline OP
Member
If we learn by our mistakes, maybe we could learn from each others also. I've made a lot of mistakes, but the first one I'll confess to is not advertising for seven years.

I'd gain about 10% new clients per year, and about 10% would move out of my territory. My business was flat for seven years, with a couple winning years & a couple losing years.

OK, I'll confess to one more. I set my rate at "the going rate" rather than figuring what I needed to charge to have a good business.

Dave

Business, Office, Estimating, Legal:
Re: Business Blunders #158140 04/02/06 08:48 PM
Joined: Apr 2002
Posts: 914
E
Electric Eagle Offline
Member
Good Subject.
A big mistake I made was not plastering my logo and phone number all over our trucks before putting them in service. We've had several vans that didn't get lettered for 2 years or more before finally getting done. We get calls regularly from people saying they got our number from the truck.

Another mistake is trying to do everything myself. I'm still working on it, but I have gotten much better at delegating. Everyone used to call me or come to me to make every little decission. Now I tell them to make a choice themselves(just make it the one I would make [Linked Image] )

[This message has been edited by Electric Eagle (edited 04-02-2006).]

Re: Business Blunders #158141 04/02/06 09:51 PM
Joined: Jan 2003
Posts: 1,429
L
LK Offline
Member
Not advertising, is costly, as you said, each year you add to your account base, at least you are able to recover, some go on for years, thinking ad's cost too much, and don't work, they usually never have more then a bottom fish account base, and after years of hard work, a business with little or no value.

"the going rate"

This is a common mistake, made by many, that are first entering the business.
Most fail to plan from day one, no goals set, no business plans in place, just a check book, and a balance, but the appearance of making money, tends to give them support, so they may continue for years operating with no compass, until they realize their efforts and hard work, are not paying what they should be.

Re: Business Blunders #158142 04/05/06 09:02 PM
Joined: Apr 2002
Posts: 914
E
Electric Eagle Offline
Member
bump

I'm srprised that me, Tiger and LK are the only EC's that have made mistakes. I was hoping to learn from others, maybe someone has figured out something that could help all of us.

Re: Business Blunders #158143 04/05/06 09:44 PM
Joined: Nov 2005
Posts: 507
M
mahlere Offline
Member
Getting into the electrical business to begin with. That was my biggest mistake.

(edited for spelling mistake)

[This message has been edited by mahlere (edited 04-05-2006).]

Re: Business Blunders #158144 04/05/06 10:36 PM
Joined: Jan 2004
Posts: 615
J
Jps1006 Offline
Member
Mine was thinking I could grow overnight trying to hire guys and sell work without enough trucks or systems in place to effcienctly manage the work load, the result being, not able to service my customers and not making a good impression on potential employees because I was running my co. like an ameture.

Re: Business Blunders #158145 04/06/06 03:11 AM
Joined: Jul 2002
Posts: 717
M
macmikeman Offline
Member
Well since there wasn't any openings in the Rolling Stones, I decided to become an electrical contractor instead. It was a good 2nd choice.

Re: Business Blunders #158146 04/06/06 08:02 AM
Joined: Dec 2004
Posts: 1,064
D
Dnkldorf Offline
Member
>>>I'm srprised that me, Tiger and LK are the only EC's that have made mistakes.<<<<

Oh no your not, everyone makes mistakes....

For me, my biggest blunder was advertising in the yellow pages, I didn't think about my market, and how the customers who were my market found who they were looking for...very expensive mistake for me..

Second blunder was employees..
Instead of finding the best people I could, I decided to find people who were somewhat trainable, problem was I didn't have time to train them.

Third:
Taking advise from someone who I thought knew what they were talking about..now I am skeptical about everything unless I see it with my own two eyes..

My list can go on and on, but in the end, life is a learning experience..

My mistakes, may not be yours..
You'll make mistakes, just try to learn from then.


Dnk...

Re: Business Blunders #158147 04/07/06 07:37 AM
Joined: Mar 2001
Posts: 2,056
R
Redsy Offline
Member
Sorry, I am not familiar with the word "mistake", it must have something to do with that other unfamiliar phrase I've heard some people say ... "I'm sorry".
Must be Greek!

[Linked Image]

Re: Business Blunders #158148 04/08/06 10:15 PM
Joined: Dec 2004
Posts: 1,064
D
Dnkldorf Offline
Member
Redsy, doesn't "ooops" come before "I'm sorry"?

I got an analogy for that, want to hear it?

[Linked Image]

Dnk...


Featured:

2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
RH1
RH1
California
Posts: 22
Joined: August 2009
Show All Member Profiles 
Top Posters(30 Days)
Admin 6
Popular Topics(Views)
258,609 Are you busy
194,195 Re: Forum
183,672 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3