1 members (Scott35),
408
guests, and
29
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jan 2003
Posts: 46
Member
|
Hello Redsy,
The only problem that I would have with this is the fact that you need the jacket in the "clip" or squeeze connector to be code compliant. Otherwise I like the concept and if you take a little time, you could strip the jacket just right to work with the "clip".
I also install receptacles with the ground up, but sorry, I don't pre-twist.
|
|
|
Entire Thread
|
Pre-twist, Ground up, and...
|
Redsy
|
03/19/03 12:06 PM
|
Re: Pre-twist, Ground up, and...
|
txsparky
|
03/19/03 12:44 PM
|
Re: Pre-twist, Ground up, and...
|
Big A
|
03/19/03 12:45 PM
|
Re: Pre-twist, Ground up, and...
|
ElectricAL
|
03/19/03 01:46 PM
|
Re: Pre-twist, Ground up, and...
|
electrician02125
|
03/19/03 09:38 PM
|
Re: Pre-twist, Ground up, and...
|
sparky
|
03/19/03 09:58 PM
|
Re: Pre-twist, Ground up, and...
|
Fred
|
03/19/03 11:50 PM
|
Re: Pre-twist, Ground up, and...
|
HotLine1
|
03/20/03 01:28 AM
|
Re: Pre-twist, Ground up, and...
|
Electric Eagle
|
03/20/03 03:01 AM
|
Re: Pre-twist, Ground up, and...
|
arseegee
|
03/21/03 04:21 AM
|
Re: Pre-twist, Ground up, and...
|
Scott35
|
03/21/03 08:07 AM
|
Re: Pre-twist, Ground up, and...
|
Redsy
|
03/21/03 01:01 PM
|
Re: Pre-twist, Ground up, and...
|
SvenNYC
|
03/21/03 01:13 PM
|
Re: Pre-twist, Ground up, and...
|
Mvannevel
|
03/21/03 01:30 PM
|
Re: Pre-twist, Ground up, and...
|
GEO
|
03/21/03 01:53 PM
|
Re: Pre-twist, Ground up, and...
|
mickky
|
03/21/03 03:03 PM
|
Re: Pre-twist, Ground up, and...
|
SvenNYC
|
03/21/03 03:33 PM
|
|
Posts: 32
Joined: June 2004
|
|
|
|