Trumpy did nto say if the house has a phone system or just POTS service for the phones.
The station cables for the voice are nice to have on a 110 cross connect block then have either a row dedicated to a cable that is ran to the demarc in the customers house and you can cross connect all the voice within one block for POTS, if there is a KEY system I would put another block with cables cables punched down and the other ends are all plugged into the phone system that way all the cross connnects for the phone system are on a block right next to the station cables. As for the data a patch panel is the way to go for residential a S89B mounting frame with a 12 port panel or a block like this will blend in well with a 110 blcok for the voice and not look so mismatched as a 66 style frame and a 110 next to it:
http://www.siemon.com/e-catalog/products/S110_Modular_Jack_Wall_Mount_Blocks.asp [This message has been edited for spelling by mkoloj (edited 04-05-2005).]
[This message has been edited by mkoloj (edited 04-05-2005).]
