Hey there, sorry i havent posted for a while i've been on holidays.
Good to see the install went well Britspark.
Since i'm a little experienced now with CCTV i'm going to do an install at my house. I'm using a 16 channel DVR - Top of the range, 15-DVR16SA CR-RW.
These are the cams i'm using:
3 x 15-CD351 - 12V DC ±10% 3.8W(Max) @ 119ma / 320ma(IR on)
1 x 15-CD47CAI - 12V DC ±10% 8W(Max) @ 200ma / 670ma(IR on)
2 x 15-CM35VAI - DC12V @ 100mA(IR off) / 160mA(IR on)
All the cams are IR, apparently they draw quite a bit of current.
How do you reccommend i power the cams?
Through a central PSU or individual PSU's?
Runs again will not be more than 30 metres for both coax and 0.75 2 core flex.
Brite Spark.
