To rant on.
I did not open a single door, panel J-box etc. What you see is how it stays.
Even the electric room doors where propped open so any store employee could walk in here.
The 480 volt switch gear had been all fused disconnect type gear, a standard for this customer. I have no Idea why the EC has modified it to breakers.
Looks like they should have ordered trim plates along with the bus bars.
You know I did not look behind the cardboard I hope the proper bus bars where bought and installed.
From the looks of this work they might have just hacked these breakers in place.
![[Linked Image]](https://www.electrical-contractor.net/ubb/frown.gif)
