[Linked Image]

This is from a Range that is mis-wired in the same fashion as we are discussing with Dryers. Both Dryers and Ranges come from the Factory setup for 3 wire hookup with the Neutral bonded to the Frame somehow. The Manufacturer's instructions (above) are somewhat lacking in detail or clarity. The 'Warning' Lists should mention removal of the bond somehow, but they don't.

[Linked Image]

This is the same Range (new wire for other reasons) with the bonding strap removed as it should be.

Bill

[This message has been edited by Bill Addiss (edited 01-08-2003).]

Bill