ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
240V only in a home and NEC?
by emolatur - 05/18/24 06:12 PM
Electricians revenge
by gfretwell - 05/09/24 08:24 PM
Safety at heights?
by gfretwell - 04/23/24 03:03 PM
Old low volt E10 sockets - supplier or alternative
by gfretwell - 04/21/24 11:20 AM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 27 guests, and 9 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#5869 12/12/01 12:07 AM
Joined: Nov 2001
Posts: 23
R
rayh78 Offline OP
Member
Had a hunter ceiling fan that was only working on low. Was using with a 3 speed wall switch the built in pull switch was kept on high.

Removed the built in switch and little black box from inside fan. Now works great but fan seems to turn about 50% faster than when new on high. My question is if anything I did will cause a dangerous problem??

#5870 12/12/01 09:30 AM
Joined: Mar 2001
Posts: 2,056
R
Member
I, personally would not leave it as such. Field modifications of UL listed fans is not a good idea. Either the controller or the fan probably needed replacement.


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5