I cut in a recessed can today and after I cut the hole I realized I cut into a heated panel. Didn't dawn on me to ask the HO if he had heated panels in the cieling - or if he even knew about them. Curious if anybody out there has had any experience repairing these panels. It is composed of sheetrock with 20 awg or so conducters run on 3 inch centers. Thanks in advance for any advice on this.
![[Linked Image]](https://www.electrical-contractor.net/ubb/mad.gif)
Curious if anybody out there has had any experience repairing these panels. It is composed of sheetrock with 20 awg or so conducters run on 3 inch centers. Thanks in advance for any advice on this.
