ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Commercial lift stations
by triple - 06/09/24 05:23 PM
Stuff that happens after we leave
by gfretwell - 06/09/24 04:26 PM
photocell requirement for metal halide ballasts
by Wayles3 - 06/02/24 03:59 PM
Photo cell diagram for MH100w light
by Wayles3 - 06/02/24 07:32 AM
Chinese motors rated 59.9A 220 v 50hertz
by gfretwell - 05/30/24 08:48 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 62 guests, and 27 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#39539 06/24/04 05:48 PM
Joined: Jun 2004
Posts: 220
T
Member
hello all, I have a question about bonding. I have an existing 120/208 3ph service, 400 amps in a bank. we are there to fix code voilations so the local inspector can sign off before the new occupants can come in. the problem is there are 5 panels fed from an aux. gutter, and no bonding bushings. There are insulating bushings, and all of the conduit is ridgid or emt, my question is can I bond the conduits outside the aux. gutter, just clamp to each pipe? I just don't want to tear into the taps!! Any advice would be appreciated.

#39540 06/24/04 07:08 PM
Joined: Nov 2003
Posts: 269
E
Member
Tomas & Betts makes a grounding wedge for this use. Here is the link. .It is available in 1/2 to 6 inch.


John
#39541 06/24/04 07:18 PM
Joined: Jun 2004
Posts: 220
T
Member
those things are exactly what I need!! thanks for the link!!


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5