ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
Shout Box
Recent Posts
Explored: Basics of PLC
by niamishra. 10/19/18 04:44 AM
Linear Power Supply Quits Under Load
by JoeTestingEngr. 10/18/18 08:47 PM
220/230/240V 60Hz Systems
by dsk. 10/17/18 01:25 PM
PLC/HMI Enclosure C2, D1
by ghost307. 10/16/18 03:31 PM
New in the Gallery:
What is this for?
Plug terminals
Who's Online Now
0 registered members (), 5 guests, and 26 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Hunter fan replacement switch #39269
06/15/04 09:08 PM
06/15/04 09:08 PM
C
CRW  Offline OP
Member
Joined: Feb 2001
Posts: 159
Bethlehem, PA USA
I know this sounds simple, but it's thrown me for a loop. Maybe some of you brains can help me out.

Recently I replaced a 3 speed pull-chain switch in a Hunter fan. I bought the new switch from a supply house, and hooked it up the same way as it was on the old switch---L, 1, 2, 3. But now I see that I'm not getting High, Medium, Low and Off, I'm getting High, Low, Low and Off. Then while looking up some stuff online, I've seen numerous DIY discussions about this exact thing, and I guess the problem is getting a switch with the right mechanics inside. Evidently the Hunter switch has different contacts, cams, etc.

Do any of you know where to get a replacement switch for a Hunter fan, besides the Hunter company, which seems like it would be a pain in the butt to deal with for just a switch?

Thanx,
Chris

Work Gear for Electricians and the Trades
Re: Hunter fan replacement switch #39270
06/15/04 10:00 PM
06/15/04 10:00 PM
Bill Addiss  Offline
Member
Joined: Oct 2000
Posts: 3,903
NY, USA
Chris,

I have had this problem too. Tried it 2 or 3 times with mixed results. One of my own Fans only has one speed now because of this.

[Linked Image]
Bill

Re: Hunter fan replacement switch #39271
06/15/04 10:36 PM
06/15/04 10:36 PM
F
fla sparkey  Offline
Member
Joined: Aug 2002
Posts: 47
Winter Haven, Florida USA
I found a local fan store a few years ago that stocks all kinds of parts including switches. The store owner takes the old switch and literally breaks it apart, then compares the cam that was inside the switch with a chart he has. Doing it this way I have been able to replace most switches without a problem.

I don't do too much repair work on ceiling fans anymore, the cost of a new one is just about the cost of a service call nowadays.



[This message has been edited by fla sparkey (edited 06-15-2004).]

Re: Hunter fan replacement switch #39272
06/15/04 10:40 PM
06/15/04 10:40 PM
C
CRW  Offline OP
Member
Joined: Feb 2001
Posts: 159
Bethlehem, PA USA
Well, glad to see I'm not the only one. At first I thought I'd just mixed up 2 of the leads, but then I read about how a lot of the switches are configured differently inside. Like for instance, 1 position might connect L-1-3, then L-2-3, then L-1-2, etc., and another switch might do something totally different. It's a shame, because my fan is really excellent, but the high speed is a little too much for dinner time, blowing the napkins and stuff all over, and the low speed is not enough to really do anything. I gotta fix it and get the middle speed back.

Re: Hunter fan replacement switch #39273
06/15/04 10:52 PM
06/15/04 10:52 PM
E
Electric Eagle  Offline
Member
Joined: Apr 2002
Posts: 914
Alpharetta, GA
I used to install fans for 6 cieling fan stores and probably have more fan experience than 10 guys put together. I know exactly the frustration you have. Your best choice is a replacement from Hunter. You may find the same switch as a generic, often times you can find the same brand and model at home depot even under diferent brand packages so look at the switch itself. (Jin You and Santa are popular brands) It needs to be the same switch or it's a crap shoot to find the right combination. The best method is to replace 1 wire at a time to avoid confusion. Was this a single or double layer switch, the doubles usually have a jumper wire between 2 of the connections. I doubt this helped you, but maybe it did. Good Luck

Re: Hunter fan replacement switch #39274
06/15/04 10:57 PM
06/15/04 10:57 PM
E
Electric Eagle  Offline
Member
Joined: Apr 2002
Posts: 914
Alpharetta, GA
Another Idea!!

If you have high speed, why don't you put a speed control on the wall for the fan and forget about the chain. If you don't have seperate switch legs for fan/light, then use a remote control. They have remotes that mount in the wall so you don't lose them, they work great too.

Re: Hunter fan replacement switch #39275
06/15/04 11:00 PM
06/15/04 11:00 PM
C
CRW  Offline OP
Member
Joined: Feb 2001
Posts: 159
Bethlehem, PA USA
I understand what you mean, but unfortunately I threw the old switch away when I replaced it a few months ago. When I tried it, it seemed OK and I didn't look too carefully at the speed differences because it was still winter and I wasn't using it much. I only noticed the problem recently.

I read about that Jin You brand on another forum, and even then it sounded like there were a few variations, so you would need the model number to be sure.(or the switch, duh!)

Re: Hunter fan replacement switch #39276
06/16/04 09:57 AM
06/16/04 09:57 AM
C
CRW  Offline OP
Member
Joined: Feb 2001
Posts: 159
Bethlehem, PA USA
Eagle--thanx for the remote idea. I thought of that back when I first put the fan in, because I don't have seperate light and fan legs, only a 2 wire up from the switch box. But the only one I saw, a Hunter brand, was a lot more than I wanted to spend. It's my own house, and I'm pretty cheap. So I'll keep searching for a suitable replacement pullchain, and eventually, when it's time to repaint this room, I'll probably cut a little in the wall and re-fish a new 14-3 up to the fan, and go with the regular combo control.

Re: Hunter fan replacement switch #39277
06/16/04 12:11 PM
06/16/04 12:11 PM
C
classicsat  Offline
Member
Joined: Nov 2002
Posts: 456
I have schematics of fans I've encountered (and had time to schematic).
http://www.hurontel.on.ca/~taitg/pages/cfan.html

To date I have seen only 2 types of switches in fans, red and black, plus yellow reversing and whatever the light kit uses.

I think I have to clarify the connection table for the black type switch.


Featured:

2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
MarkC10
MarkC10
CA, Inland Empire
Posts: 43
Joined: September 2013
Show All Member Profiles 
Top Posters(30 Days)
sparky 11
Popular Topics(Views)
250,493 Are you busy
188,054 Re: Forum
177,694 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.6.1
(Release build 20180101)
Page Time: 0.032s Queries: 14 (0.004s) Memory: 1.0023 MB (Peak: 1.1698 MB) Zlib enabled. Server Time: 2018-10-20 11:31:32 UTC