ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
Unusual Well Pump Switch Failure
by sabrown - 10/28/20 04:31 PM
Look at this mess...
by InspectorE - 10/27/20 09:09 PM
New tool
by gfretwell - 10/24/20 11:09 AM
Where is Everyone?
by Bill Addiss - 10/17/20 07:04 PM
New in the Gallery:
Facebook follies, bad wiring
FPE in Germany pt.2
Who's Online Now
1 registered members (Scott35), 18 guests, and 14 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
electrical pricing #31371 11/20/03 04:14 PM
Joined: Nov 2003
Posts: 9
electric_man Offline OP
Junior Member
need help on pricing electrical jobs. decided to go out on my own but not sure of what the going rate on electrical pricing , or what is a fair rate to charge . have been doing mostly residental by the sq. ft price but have had a few renovations that need to quote by the "drop". i am licensed and know how to do the work but need some help on how to bid jobs..any info would be appreciated.

Work Gear for Electricians and the Trades
Re: electrical pricing #31372 11/21/03 12:15 AM
Joined: Mar 2002
Posts: 86
straightedge Offline
I feel your pain,

I also went on my own about five years ago. I know the trade but had no idea on how to do estimates.

I finally started bringing a notebook with me on big jobs, like a new house or remodel. At the end of each day I would write down what I did and how long it took. That's called job costing.

I now bid houses at approximately $3.00 per square foot. Depends on how extensive the electrical is. Recess cans make a big difference in price.

I don't buy any light fixtures except for the recess cans. I write that in my proposal. You have no idea what kind of light fixture the home owner wants and even if you bought exactly what they desired it would still be wrong. I Make the home owner or the general contractor buy the light fixtures and the ceiling fans. Your price looks lower and there are less headaches.

Good luck,

Re: electrical pricing #31373 11/24/03 11:25 PM
Joined: Aug 2001
Posts: 151
Dallas Offline
Speaking of light fixture labor, don't forget unassembled light fixtures and ceiling fans take time to assemble even before hanging. I include wording to make sure I'm paid for the assembly time.

Ever measured the time to assemble a large crystal chandelier with all the baubles?

Re: electrical pricing #31374 11/25/03 05:29 PM
Joined: Nov 2003
Posts: 9
electric_man Offline OP
Junior Member takes me over 30 min sometimes to install a ceiling fan and light....


2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman


Member Spotlight
Bill Addiss
Bill Addiss
Posts: 3,961
Joined: October 2000
Show All Member Profiles 
Top Posters(30 Days)
Popular Topics(Views)
271,031 Are you busy
205,036 Re: Forum
193,149 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3