ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
Southwire Recalls Electrical Outlet Boxes
by Admin - 08/21/19 06:39 PM
Fuse blower plug?
by HotLine1 - 08/20/19 01:50 PM
100 year old Light Bulb
by HotLine1 - 08/20/19 01:26 PM
Forum Updates Coming Soon.
by Admin - 08/18/19 01:55 PM
Anybody Remember this?
by Bill Addiss - 08/17/19 09:07 PM
New in the Gallery:
What is this for?
Plug terminals
Who's Online Now
1 registered members (Scott35), 7 guests, and 9 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Pipe holder #216580 12/30/15 04:21 PM
Joined: Oct 2002
Posts: 830
S
sparkync Offline OP
Member
I already have a 4" pipe holder on the top of my van. I actually have it strapped down by bungie straps. I'm thinking about changing over to 6" pvc with caps on each end. I'm trying to determine how to secure it. Other than threaded rod, anybody have any other ideas? I've calculated the cost at Lowes and it will cost me around $100.00 not counting the straps to hold it. I can't find any other factory designed holders that will beat that price so far.
Thanks...

Work Gear for Electricians and the Trades
Re: Pipe holder [Re: sparkync] #216581 12/30/15 09:45 PM
Joined: Jan 2005
Posts: 5,316
renosteinke Offline
Cat Servant
Member
Why re-invent the wheel?

http://www.americanvan.com/van-and-truck-accessories/accessories/conversion-kit.html

American Van has a very nice kit for just what you want.

Re: Pipe holder [Re: sparkync] #216583 12/31/15 07:05 PM
Joined: Apr 2002
Posts: 7,105
HotLine1 Offline
Member
sparkyinak:
A solution that one of my guys used was...
6" unistrut 2 piece pipe clamps, mounted on thin strut attached to the roof racks.

It worked.

One drawback to using the PVC with the PVC end cap is if you get too 'pushy' putting EMT in, you could break thru the front cap.

BTW, the American Van item was put on two of my other vans.

Happy New Year


John
Re: Pipe holder [Re: sparkync] #216584 01/01/16 06:08 AM
Joined: Jul 2004
Posts: 9,382
G
gfretwell Offline
Member
I can't imagine breaking a schedule 40 cap with PVC or even RMC.
You might break a sun brittle DWV cap I suppose.


Greg Fretwell
Re: Pipe holder [Re: sparkync] #216587 01/01/16 12:47 PM
Joined: Apr 2002
Posts: 7,105
HotLine1 Offline
Member
Greg:
It was plumbing white PVC with a 'cap' on the front end and a 'clean-out' screw cap at the back end.

I hesitate to detail 'to pushy', there may have been some fooling around involved.



John
Re: Pipe holder [Re: sparkync] #216588 01/01/16 03:16 PM
Joined: Jan 2008
Posts: 21
J
JoeyD Offline
Member
I keep pipe inside the truck. The PVC on the roof, which I used for many years before, just got the pipe or wiremold dirty or banged up.

Re: Pipe holder [Re: sparkync] #216590 01/01/16 03:24 PM
Joined: Oct 2000
Posts: 3,912
Bill Addiss Offline
Member
In my old work truck I built a floor with 2 x 6 as joists and 3/4 plywood on top. The pipe fit just fine under there and was out of the way.

Bill

Re: Pipe holder [Re: sparkync] #216593 01/01/16 05:55 PM
Joined: Jan 2005
Posts: 5,316
renosteinke Offline
Cat Servant
Member
Bins under the bed are fine, if you have the length. The problem comes when the pipe is 10-ft long, and the bed is 8-ft, or even 6-ft, long.

Since we carry ladders, that means a ladder rack is just a matter of time. It sure would be nice if you were able to use the space under the seats to take up the extra length.

Some pick-up truck racks have angled bins for the pipe, bins that work really well.

I had made some pipe storage atop my truck using 4" EMT. I used strut and strut straps to mount it. My roof leaked. Ordinary duct tape was plenty good for sealing the ends; sunlight would cause me replace it about once a year.

For the front .... well, Harbor Freight has a very simple $150 wood lathe that will let yo make fancier nose caps, if you want them. Make them look like missiles, really big pencils, or (with some carving) #50 Phillips screwdrivers.

For the back, closing the end is the challenge. The American Van product addresses this quite well. Screw caps get 'too tight,' too easily.

Capacities of 4" EMT, as I recall:
1/2" EMT: 2 bundles
3/4" EMT: 1 bundle
1" EMT: 6 sticks

With this in mind, I understand the appeal of a rectangular bin, rather than large pipe.



Featured:

2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
BEAMEUP
BEAMEUP
WA
Posts: 27
Joined: December 2004
Show All Member Profiles 
Top Posters(30 Days)
Admin 23
GeneSF 8
Popular Topics(Views)
257,892 Are you busy
193,628 Re: Forum
183,248 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3