ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
Ground fault remover :-)
by dsk - 01/24/21 04:35 AM
Questioning the electrical norms
by Trumpy - 01/24/21 03:16 AM
From an outsider- How does tipping work?
by gfretwell - 01/23/21 06:13 PM
Photo Editing Software?
by JoeTestingEngr - 01/23/21 12:47 PM
Can I ask for your input?
by HotLine1 - 01/22/21 01:52 PM
New in the Gallery:
Facebook follies, bad wiring
FPE in Germany pt.2
Who's Online Now
1 registered members (Scott35), 23 guests, and 17 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
Federal Pacific Panels #210639 07/17/13 05:31 PM
Joined: Jul 2013
Posts: 44
SafetyWired Offline OP
Member
I have heard various things over the years regarding Fed Pacific panels and breakers, and I cannot seem to get a strait answer anywhere. Figured I would throw this out there...this is also somewhat related to another thread 'Adjustable-Trip Breakers'. In that thread I mistakenly said the panel was an old GE. It is not, it is an old FP panel. A newer GE TED type breaker was installed before my time there.

1) Were FE panels and breakers outlawed?
2) NEC from my understanding cannot tell you what equip to use as long as it has a UL...correct?
3) They still sell FE breakers...how could that be legal if FE is illegal?
4) If outlawed...who outlawed them. AHJ has authority, however one inspector will say one thing and another 180 deg different.
5) I was told some liability insurance co's will not insure property with FE equip.

Work Gear for Electricians and the Trades
Re: Federal Pacific Panels [Re: SafetyWired] #210640 07/17/13 07:15 PM
Joined: Jan 2005
Posts: 5,316
renosteinke Offline
Cat Servant
Member
Golly gee- another opportunity for me to upset folks laugh What shall I do?

Hardly anyone in the trade actually likes FPE panels- but that's a far cry from the 'sky is falling' panic the sight of an FPE panel seems to provoke in some.

To answer your questions:
1) I am not aware of any low,or code amendment, that 'outlawed' FPE panels in any way.

2) NEC only says to use listed equipment.

3) Who sells FPE breakers?The firm has been out of business for some time. True, there are folks selling used breakers, and there are other makers who make breakers that fitin FPE panels. I doubt you'll ever see a new FPE breaker for sale, though.
In the broader sense, since when did something being illegal make it illegal to sell them? Advertisers in "High Times" have made fortunes selling to the illegal marijuana growing market- and that's only one example.

4) Put up or shut up. That goes for inspectors, too. Exactly what is being said? What's their source? Otherwise, see my answer to #1.

5) Again, put up or shut up. Exactly what is being said by which insurance company? For that matter, 'liability' insurance is completely different from 'homeowners' insurance.

In practical terms, FPE being out of business really puts a bind on their continued use. Replacement breakers are quite expensive, and you can't get GFI or AFCI breakers. Other code issues (like the maximum number of disconnecting means) come into play when you try to expand.

Re: Federal Pacific Panels [Re: renosteinke] #210641 07/17/13 07:33 PM
Joined: Jul 2007
Posts: 1,335
S
sparkyinak Offline
Member
Well, Reno, tell us how you really feel... laugh


"Live Awesome!" - Kevin Carosa
Re: Federal Pacific Panels [Re: SafetyWired] #210643 07/17/13 08:59 PM
Joined: Aug 2002
Posts: 402
J
jdevlin Offline
Member
The Canadian equivalent is still sold and quite popular. It's called Federal Pioneer sold by Schneider Electric.

Re: Federal Pacific Panels [Re: renosteinke] #210644 07/17/13 09:11 PM
Joined: Jul 2013
Posts: 44
SafetyWired Offline OP
Member
Originally Posted by renosteinke
Golly gee- another opportunity for me to upset folks laugh What shall I do?

Hardly anyone in the trade actually likes FPE panels- but that's a far cry from the 'sky is falling' panic the sight of an FPE panel seems to provoke in some.

To answer your questions:
1) I am not aware of any low,or code amendment, that 'outlawed' FPE panels in any way.

2) NEC only says to use listed equipment.

3) Who sells FPE breakers?The firm has been out of business for some time. True, there are folks selling used breakers, and there are other makers who make breakers that fitin FPE panels. I doubt you'll ever see a new FPE breaker for sale, though.
In the broader sense, since when did something being illegal make it illegal to sell them? Advertisers in "High Times" have made fortunes selling to the illegal marijuana growing market- and that's only one example.

4) Put up or shut up. That goes for inspectors, too. Exactly what is being said? What's their source? Otherwise, see my answer to #1.

5) Again, put up or shut up. Exactly what is being said by which insurance company? For that matter, 'liability' insurance is completely different from 'homeowners' insurance.

In practical terms, FPE being out of business really puts a bind on their continued use. Replacement breakers are quite expensive, and you can't get GFI or AFCI breakers. Other code issues (like the maximum number of disconnecting means) come into play when you try to expand.

You didn't upset me at all. I appreciate your candor. The 'put up or shut up' is my attitude, and similar to my response when my supervisor was telling me about his experiences. That is why I threw it out here. I have seen no legal documentation stating FP is 'illegal'.
I wasn't talking about homeowners insurance. I was talking about a insurance carrier for a commercial property who said they would not cover the premises because of the equipment. I was also told (I know he said she said) that some liability may not cover you if installing or working with FE. Sounds ridiculous, and I am pretty sure it is false, however stranger things have happened.
Again was just throwing out there to see what some of you have heard and maybe some authority here could speak up and show documentation

Last edited by SafetyWired; 07/17/13 09:16 PM.
Re: Federal Pacific Panels [Re: SafetyWired] #210645 07/17/13 09:17 PM
Joined: Dec 2000
Posts: 4,287
electure Offline
Member
The only FPE breakers in question are the Stab-Loks.
The breakers lost their UL listing in the late '70s or early '80s, but gained the listing back in 6 months or so. The Stab-Loks were only available in 15-100 amp ratings.

There were no problems reported with any of the other FPE breakers; in fact the FPE breakers were factory installed in some non FPE brand panels.

I think their transformer division is still alive and well (I might be wrong about this, though)


Re: Federal Pacific Panels [Re: electure] #210646 07/17/13 09:19 PM
Joined: Jul 2013
Posts: 44
SafetyWired Offline OP
Member
Originally Posted by electure

The only FPE breakers in question are the Stab-Loks.

There were no problems reported with any of the other FPE breakers; in fact the FPE breakers were factory installed in some non FPE brand panels




Where can I find this documented?

Re: Federal Pacific Panels [Re: SafetyWired] #210647 07/17/13 09:37 PM
Joined: Dec 2000
Posts: 4,287
electure Offline
Member
For the Stab-loks see here:

http://inspectapedia.com/fpe/fpepanel.htm


"There were no problems reported with any of the other FPE breakers; in fact the FPE breakers were factory installed in some non FPE brand panels"

I don't know of anywhere it's documented. I'm just relying on 40+ years of memories. Sorry frown






Re: Federal Pacific Panels [Re: SafetyWired] #210648 07/17/13 09:49 PM
Joined: Apr 2002
Posts: 7,227
HotLine1 Offline
Member
The way I understand this is:

FPE Stab-Loc breakers had an issue, and were supposedly recalled and replaced. Fact or fiction, I cannot swear either way.

There are listed replacement 'Stab-Loc' breakers (new) available from American Circuit Breaker, but they are not cheap.

PS: As an AHJ, I do not have the legal authority to 'outlaw' any item, nor does any other NJ AHJ.

As to any official documentation, I doubt that any of the recall info is still around. I personally never saw anything, other than a notice in a supply house. They were a big FPE distributor at the time.

As to being 'outlawed' or 'illegal' IMHO, anything that was installed in compliance with the Code that was in effect at the time of installation is 'legal'.

The panels were not an 'issue' to the best of my knowledge.

I am not aware of any insurance carriers that have issues with FPE.

Now, all that said, the 'Home Inspectors' have a field day with FPE panels. I get numerous calls from sellers, buyers, and real estate people. They all look for the same info that ShortCircuit is asking. My stock answer is basically what I stated above.

Replacements or additional breakers were $20-$25 for a single pole, AFCI are not available (AFAIK), and a replacement panel would be the best solution for a homeowner.


John
Re: Federal Pacific Panels [Re: SafetyWired] #210649 07/17/13 10:05 PM
Joined: Apr 2002
Posts: 7,227
HotLine1 Offline
Member
Electure:

Thank you for the link. IMHO, the date of 2002 seem to be incorrect. I think that the FPE issues here in NJ was in the late 70s/early 80s. The supply house I mentioned above was long gone in '02.

I did not read all the info at this time. As I said above, a replacement panel is the best solution.

BTW, I did a panel change inspection the other day, and laying next to the new Sq D Homeline are two (2) NEW FPE Stab-Locs. Both in 'retail' blister cards, quite dusty. Price labels from Rickels (Home Center; long gone) $2.79!!


John
Page 1 of 3 1 2 3

Featured:

2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Posts: 165
Joined: March 2007
Show All Member Profiles 
Top Posters(30 Days)
Trumpy 18
NORCAL 12
Popular Topics(Views)
274,136 Are you busy
207,941 Re: Forum
195,593 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3