ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by gfretwell - 03/28/24 12:43 AM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 276 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#209012 03/03/13 02:09 PM
Joined: Jan 2004
Posts: 1,507
G
Member
Are residential bathroom fans required to be controlled by a switch?


George Little
Stay up to Code with the Latest NEC:


>> 2023 NEC & Related Reference & Exam Prep
2023 NEC & Related Reference & Study Guides

Pass Your Exam the FIRST TIME with the Latest NEC & Exam Prep

>> 2020 NEC & Related Reference & Study Guides
 

Joined: Jul 2004
Posts: 9,923
Likes: 32
G
Member
Not that I can think of ... assuming you can use the breaker for a disconnect.
It is not uncommon to see them on motion sensors.


Greg Fretwell
Joined: Jun 2004
Posts: 1,273
T
Member
Who, in a residence, could tollerate the HVAC drain that an unswitched fan would cause?

Just the noise, alone, would have the residents howling.


Tesla
Joined: Feb 2003
Posts: 368
M
Member
I have seen them on humidistat's in the hall and go off and on as required depending on the whole house level and not just the bathroom. Doesn't do anything for getting rid of the smell though.

Joined: Feb 2002
Posts: 2,233
H
Member
In my 30 years of electrical experience, I have yet to see a bath fan NOT on a switch of some kind. Most of them go on with a light in the bathroom. I myself put them on timers, because my kids never remember to shut off lights and such.

Joined: Feb 2003
Posts: 368
M
Member
Timers are better than switches because you want the fan to run after the shower / bath to allow all the humidity to exhaust out. If its on a light switch you only get ventilation while you are in there.

Somewhere I read or was told it should be running for 30 minutes after you get out to bring the humidity back to normal.

Joined: Jan 2004
Posts: 1,507
G
Member
I agree with all of the responses. Switch is not required per code but common sense should prevail and it becomes a design issue.


George Little
Joined: Jun 2004
Posts: 613
S
Member
I agree the switch is not required by the NEC. The exhaust fan also is not required by the NEC.

Some of the instructions with exhaust fans mention a wall switch in the installation instructions. So 110.3(B) may apply.

Also building codes and building energy codes may mandate an accessible wall controll for occupants.

New this year in Massachusetts, all venting has to be done by a HVAC installer and permits filed with inspections by the mechanical inspector.

This is fine by me...I never looked forward to drilling 4inch holes with a holesaw up on a 24ft extension ladder.


Joined: Jul 2004
Posts: 9,923
Likes: 32
G
Member
You find the fan requirement in the building code if your bathroom window is too small or doesn't open.

Typically that is 3 sq/ft with half opening.


Greg Fretwell
Joined: Apr 2002
Posts: 7,381
Likes: 7
Member
Fan operation 'may' be addressed within the Energy Codes. I'll ask one of the Building guys today. I have not seen any without a switch, timer, or motion.

Most of the new comm are using motions (with override) in the restrooms.


John
Page 1 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5