ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
Questioning the electrical norms
by HotLine1 - 03/04/21 12:35 PM
Lock-down Thread
by gfretwell - 03/03/21 12:38 PM
Northern Tool Recalls Powerhorse Generators
by Admin - 02/25/21 09:49 PM
You will never guess
by gfretwell - 02/25/21 07:48 PM
New in the Gallery:
Facebook follies, bad wiring
FPE in Germany pt.2
Who's Online Now
0 registered members (), 14 guests, and 19 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
UK dvd players and US outlets don't mix. #193445 04/02/10 02:39 AM
Joined: Sep 2003
Posts: 47
G
GeneSF Offline OP
Member
http://www.rutlandherald.com/article/20100401/THISJUSTIN/4010362/1002/NEWS01

Normally 120V to a 230V device shouldn't do anything,but since UK and US hot and neutral positions are different,could this have caused the smoke?

Test Equipment:
Large Selection of Test Equipment For Electrical, HVAC, Test & Measurement
Large Selection of Test Equipment For Electrical, HVAC, Test & Measurement
Re: UK dvd players and US outlets don't mix. [Re: GeneSF] #193447 04/02/10 07:11 AM
Joined: Mar 2005
Posts: 1,803
Alan Belson Offline
Member
I see a poster quotes "forcing a round pin UK plug" into an Americal receptacle. I doubt that many round pin 5A plugs have been fitted to UK appliances for several decades. I'd bet it was a faulty adaptor. A BS1363 13A plug would need a stick of dynamite to force into an American recept.... Hey, perhaps that's what apertained... crazy


Wood work but can't!
Re: UK dvd players and US outlets don't mix. [Re: Alan Belson] #193448 04/02/10 11:44 AM
Joined: Dec 2001
Posts: 2,492
T
Texas_Ranger Offline
Member
Unless both TV and DVD player were live chassis and connected via the shield of the RCA cable I can't see how polarity could possibly have been an issue here.

Probably the TV went up in smoke when the fire caused by a wobbly adaptor spread far enough to reach it. The stick of dynamite sounds pretty reasonable too though.

Re: UK dvd players and US outlets don't mix. [Re: Texas_Ranger] #193449 04/02/10 11:54 AM
Joined: Dec 2002
Posts: 1,250
D
djk Offline
Member
Polarity was most definitely not the issue as any DVD player sold in the UK would comply with European standards, which would include no-sensitivity to polarity as they have to be safely connectable using CEE 7 family of plugs which are not polarised.

Also, most DVD players have a figure of 8 connector on the back which cannot be polarised.

Also I have no idea how anyone could insert a UK plug into a NEMA 15A socket outlet. They're very physically different devices.

It's also completely impossible to bend or twist BS1363 or older BS546 pins. They're solid brass and pretty serious bits of machined metal. They won't bend or deform, even if you took a sledge hammer to them. The plug would break first!

I can only conclude that someone was using a dangerous adaptor or some kind of plug-in transformer.

These devices need to be regulated to comply with UL or CE type certification regimes.



Re: UK dvd players and US outlets don't mix. [Re: djk] #193450 04/02/10 05:25 PM
Joined: Dec 2001
Posts: 2,492
T
Texas_Ranger Offline
Member
Do you really trust China-made DVD players?

Seriously I guess the adaptor or transformer shorted. Jokingly I still like the dynamite best! laugh

I don't think the poster who wrote about the "round pin UK plug" was in any way involved in the affair and just mixed up BS1363 and Euro plugs (thought the UK used Euro too).

Re: UK dvd players and US outlets don't mix. [Re: Texas_Ranger] #193452 04/02/10 07:26 PM
Joined: Sep 2003
Posts: 47
G
GeneSF Offline OP
Member
Originally Posted by Texas_Ranger

I don't think the poster who wrote about the "round pin UK plug" was in any way involved in the affair and just mixed up BS1363 and Euro plugs (thought the UK used Euro too).


Correct. The comments are made by readers registered with the web site. Not much detail to go on,but this is the first time I have heard of a 230V appliance smoking up from being connected to a 120V outlet.

Thanks for everyone's input on the matter. smile

Re: UK dvd players and US outlets don't mix. [Re: GeneSF] #193457 04/03/10 03:41 AM
Joined: Nov 2002
Posts: 790
W
wa2ise Offline
Member
I noticed that the date of the article was April Fool's Day, FWIW. Anyway,

Most DVD players and similar consumer electronics usually have power supplies that can accept any powerline between 100V to 250V 50 or 60Hz. Usually a switching power supply that automatically adjusts itself to whatever line voltage it finds itself supplied with. This allows China to ship the same product to anywhere in the world, and all they need do is supply a detachable power cord with the destination's power plug. This means that that DVD player should have had no problem with 120V vs 240V. Another issue would be the British video signal is PAL (25 frames a second) and America used NTSC (30 frames a second), but a TV set shouldn't burn out with the wrong signal.

It was probably just a bad plug adapter (bad contact making it hot and catch smoke).

Re: UK dvd players and US outlets don't mix. [Re: wa2ise] #193469 04/04/10 02:23 PM
Joined: Dec 2001
Posts: 2,492
T
Texas_Ranger Offline
Member
Quote
It was probably just a bad plug adapter (bad contact making it hot and catch smoke).

Must have been a seriously bad contact given the usual current draw of a DVD player. Maybe it even shorted, that could well cause a fire.

I mean I ran a hair dryer on a seriously wobbly adaptor and it didn't even become hot, even though it was awfully close to falling out of the NEMA 5-15 outlet! (if I remember correctly 1200W 120V or maybe even more).
(In case eanyone worries, that was when I was 15, before I joined here).

Re: UK dvd players and US outlets don't mix. [Re: Texas_Ranger] #193471 04/04/10 05:00 PM
Joined: Mar 2005
Posts: 1,803
Alan Belson Offline
Member
Adaptors are the bane of my life! mad No matter how many you have, they all vanish into thin air when you urgently need one; or you find dozens, herded together like Wildebeasts stretching to the horizon - and they are all the wrong ones!
Living in France, with a lot of brit and french tools, camera, toothbrush and chargers etc., plus visiting the anklebiters in Blighty regularly, I have to put up with French to English and vice versa on an almost daily basis.
For some reason they are all flimsy china junk [sic], prone to falling out of sockets, overheating & disintegration.
Oh for an Eu wide standard!

Re: UK dvd players and US outlets don't mix. [Re: Alan Belson] #193477 04/04/10 09:52 PM
Joined: Jul 2004
Posts: 9,571
G
gfretwell Offline
Member
I guess the Americans settled on the 5-15 and use it universally because they know we will just cut the cap off, strip the wires and poke them in the holes if the plug doesn't fit. "Get'er done!"


Greg Fretwell
Page 1 of 2 1 2

Featured:

2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Grover
Grover
Sebago, ME, USA
Posts: 109
Joined: January 2005
Show All Member Profiles 
Top Posters(30 Days)
Popular Topics(Views)
275,641 Are you busy
209,564 Re: Forum
196,916 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3