ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
FPE in Germany
by NORCAL - 10/16/19 08:24 AM
Help with aging employee advice.
by Bill Addiss - 10/15/19 10:58 PM
Fuse blower plug?
by gfretwell - 10/13/19 03:23 PM
Power factor and transformer efficiency
by TeslaEdison - 10/13/19 04:05 AM
Permit Snafus...AHJs and Contractors Jump in
by HotLine1 - 10/10/19 07:35 AM
New in the Gallery:
FPE Breaker panel in germany
What is this for?
Who's Online Now
0 registered members (), 10 guests, and 12 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
4/0 plastic weatherhead #180370 08/23/08 03:45 PM
Joined: Oct 2002
Posts: 830
S
sparkync Offline OP
Member
I wish they would make the 4/0 plastic weatherhead a little wider. It is terrible to try and bend a piece of 4/0 alum. into a weatherhead. Anyone else have this problem? The brand I've been using is M&W. I've tried to pull it up on the web and can't find it. Anyone what the name of the company that makes it? I know it probably won't do any good, but I want to give them my input. Some of these
manufacturers needs some "hands on" experience with their
products, and they would be willing to make some changes in them. Another product I've practically always had a problem with is the metal weatherproof single and double gang boxes. Almost always the ground screw will strip out. If I had time, I'd call each one of the manufacturers, and present my complaint. Seems like poor quality materials, make up the greatest portion of my problems. Sorry for the rage...Had to vent... Thanks for listening... Steve smile

Work Gear for Electricians and the Trades
Re: 4/0 plastic weatherhead [Re: sparkync] #180371 08/23/08 03:56 PM
Joined: Jul 2002
Posts: 680
W
walrus Offline
Member
I started using a crimp block fork for grounding bell boxes. Trying to put a bare wire under the screw results in a stripped hole nearly every time

Re: 4/0 plastic weatherhead [Re: walrus] #180372 08/23/08 04:46 PM
Joined: Jul 2007
Posts: 1,335
S
sparkyinak Offline
Member
Have you tried eating Wheaties for breakfest? smile
Are you talking about those "flathead" residential weather heads? I use one of the bubble shape ones.


"Live Awesome!" - Kevin Carosa
Re: 4/0 plastic weatherhead [Re: sparkyinak] #180374 08/23/08 05:12 PM
Joined: Jul 2004
Posts: 9,408
G
gfretwell Offline
Member
I have got in the habit of taking out the screw in the bell box and using a slightly longer swage form screw before it gets a chance to strip.


Greg Fretwell
Re: 4/0 plastic weatherhead [Re: gfretwell] #180380 08/23/08 08:38 PM
Joined: Oct 2006
Posts: 745
E
EV607797 Offline
Member
I agree about the ground screw stripping out in Bell Boxes. It's been that way for years, but even worse now that they aren't made in the USA. I also thread the screw all the way in first, then back it out just barely enough to let the wire fit under it. That sometimes helps.

I can't say much about the weather heads since 90% of the services we see are underground. Even on overhead services, the power company does the entire upper half of the service, including the cable and weather head. I can't remember the last time that I bought a weather head, except for the ones used on conduit.


---Ed---

"But the guy at Home Depot said it would work."
Re: 4/0 plastic weatherhead [Re: EV607797] #180387 08/24/08 01:46 AM
Joined: Aug 2007
Posts: 61
TOOL_5150 Offline
Member
I agree on the bell boxes. The grounding screw is a joke. A spade or ring terminal crimped onto a wire is definately the way to go.

~Matt


I would rather beg for forgiveness then beg for permission.
Re: 4/0 plastic weatherhead [Re: TOOL_5150] #180398 08/24/08 01:10 PM
Joined: Mar 2001
Posts: 333
S
stamcon Offline
Member
Steve, here is a link for M&W.

http://www.mwelectricmfg.com/

steve


Steve
Re: 4/0 plastic weatherhead [Re: stamcon] #180400 08/24/08 01:34 PM
Joined: Jun 2007
Posts: 301
J
JValdes Offline
Member
If you run across any of those Chinese made bell box covers STAY AWAY. It takes more time to get the cover on than it takes to mount the box and connect the devices.

Re: 4/0 plastic weatherhead [Re: JValdes] #180421 08/25/08 06:48 PM
Joined: Oct 2002
Posts: 830
S
sparkync Offline OP
Member
Stamcon, thanks for the website. I sent them my complaint. I'm sure they can't do anything about it without making another "mold", but at least I put my 2 cents worth in.

sparkyinak: I had enough wheaties one time to break one trying to get it on. Of course it was in cold weather:)

The power company use to run them in my area too, but somehow one of the "big guys" must have talked them out of it. I think I'll try to pursue it again with them one day. Things just seem to keep getting more complicated all the time, but that's what keeps us pressing on, right? Without resistance, a plane couldn't get off the ground:)

Thanks, Steve...

Re: 4/0 plastic weatherhead [Re: sparkync] #180422 08/25/08 08:28 PM
Joined: Jul 2007
Posts: 1,335
S
sparkyinak Offline
Member
My favorite weather head packing job was a three run parallel service of four copper 500kc mils in a 3" Weather heads. The wet falling snow, and the 25 degree weather didn't help any.

It is getting cheaper at someone elses expense.


"Live Awesome!" - Kevin Carosa

Featured:

2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
sbi
sbi
indiana
Posts: 47
Joined: March 2008
Show All Member Profiles 
Top Posters(30 Days)
sparky 10
Popular Topics(Views)
259,549 Are you busy
194,946 Re: Forum
184,372 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3