ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Violation?
by renosteinke - 01/27/23 09:52 PM
Does NEC 551.71 (F) apply to dwellings?
by BigB - 01/20/23 10:46 AM
Power submeter connections
by HotLine1 - 01/19/23 09:09 AM
AFDD's coming to the UK
by Texas_Ranger - 01/17/23 07:22 PM
New in the Gallery:
Burger King crown sillyness
Burger King crown sillyness
by wa2ise, December 11
240/208 to a house
240/208 to a house
by wa2ise, October 9
Who's Online Now
0 members (), 77 guests, and 10 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#179425 07/12/08 05:25 PM
Joined: Mar 2005
Posts: 34
C
Member
I need to purchace a hammer drill and attachment for driving ground rods
Any suggestions? Around 500.00
Thanks
Chris

Joined: Jan 2005
Posts: 5,370
Likes: 1
Cat Servant
Member
First of all, you do not want a 'hammer drill." You want either a 'roto hammer' or 'demolition hammer.'

The Roto hammer will need to be large enough to take either SDS-Max or Spline bits. (Spline drive is pretty much out of favor). If it's a demolition hammer, it will have take hex shanks, either 3/4 or 1 1/8".

For the money you want to spend, and the relative rare use the tool will see, I suggest you consider the Harbor Freight offerings. Tool snobbery aside, I have found this "Cheap Chinese junk" to perform quite adequately in these particular tools.

If your area is particularly rocky, or you also need to take apart post light bases, I suggest you 'up the ante' to about $900, and get Makita's 35# (half size) jackhammer.

While any of these tools will drive the rod without using a bit, I always use a bit. I see no reason to risk the tool by not having a bit in place. Ground rod driving bits cost about $60.

Joined: Jul 2007
Posts: 265
W
Member
I have a Hilti TE-75 that I bought used off of e-bay for $475 plus shipping. Bought the bit to drive ground rods with and never regretted it. Wont drive one thru rock, but not much rock around here anyway.


Jimmy

Life is tough, Life is tougher when you are stupid
Joined: Oct 2002
Posts: 482
Z
Member
I'll throw in another vote for Hilti Chris. I've never had a days grief from any of my Hilti power tools.

I would never ignore advise from reno though, so consider cost vs. intended use and good luck on your decision.


Link Copied to Clipboard
Featured:

Tools for Electricians
Tools for Electricians
 

* * * * * * *
2023 National Electrical Code (NEC)
2023 NEC Now Available!
 
* * * * * * *

2020 Master Electrician Exam Preparation Combos
2020 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
HotLine1
HotLine1
Brick, NJ USA
Posts: 7,333
Joined: April 2002
Top Posters(30 Days)
BigB 8
triple 3
Popular Topics(Views)
302,632 Are you busy
231,938 Re: Forum
216,587 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.5