ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
Shout Box
Recent Posts
Fuse blower plug?
by gfretwell. 07/23/19 01:18 AM
Baseboard Mounted Light Bulb Socket
by SPSchuman. 07/15/19 03:22 PM
Hunter Fan Recalls Brunswick 3 & 4 Light Fans
by Admin. 07/11/19 11:08 AM
Honeywell Recalls some Smoke Sensors
by Admin. 07/11/19 11:03 AM
New in the Gallery:
What is this for?
Plug terminals
Who's Online Now
0 registered members (), 8 guests, and 18 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Plan Review #178528
06/03/08 04:13 PM
06/03/08 04:13 PM
luckyshadow  Offline OP
Joined: Jan 2005
Posts: 315
Maryland USA
I'm looking into a new position- Inspector for an engineering firm that deals mainly with construction management. I would be the AHJ on these projects.
The position will require me to do plan review on drawings submitted for permits.
I have extremely little experience in plan review -
Those of you who have done this, if you could pass on any tips, information, and things that I might want know , I would be most appreciative

Business, Office, Estimating, Legal:
Re: Plan Review [Re: luckyshadow] #178534
06/03/08 07:24 PM
06/03/08 07:24 PM
renosteinke  Offline
Cat Servant
Joined: Jan 2005
Posts: 5,316
Blue Collar Country
It should tell you something that "plan reviewer" is typically a more senior position than "inspector," and requires several years of inspection experience.

In brief, you look at the plans, reviewing them for compliance with all codes. For example, if that false facade is more than a certain size, there needs to be access into it - even if there's nothing in there. Or that there has to be so many handicapped parking spaces. And so on.

Re: Plan Review [Re: luckyshadow] #178535
06/03/08 07:26 PM
06/03/08 07:26 PM
BPHgravity  Offline
Joined: Apr 2003
Posts: 139
Port Charlotte, Florida
My suggestion would be to get a plan review checklist. These can be purchased from organizations such as ICC, NFPA, IAEI, ect. Or, make one of your own. While I feel checklists for inspections are not all that useful, they can be useful when "learning" or new to plan review.

The key to doing a good plan review is to be consistent and comprehensive. When in doubt, request more information or engineering for an unclear detail.

Don't be afraid to contact the architect or engineer to receive guidance or clarity on a detail or document submittal.

The plan examining is the point during the construction process where 99% of problems and non-compliant issues can be found and corrected with the least amount of cost and delay. Take your time with plans. Never rubber stamp even the simplest of installations.

Also, get yourself a good magnifying glass, calculator, architecural ruler, and make sure you have a good drafting table or large working surface so that large plan sets can be looked at comfortably and for an extended period of time.

Bryan P. Holland, ECO.
Secretary - IAEI Florida Chapter
Re: Plan Review [Re: BPHgravity] #178549
06/04/08 07:09 AM
06/04/08 07:09 AM
SteveFehr  Offline
Joined: Mar 2005
Posts: 1,213
Chesapeake, VA
Plan reviewer is not my primary job, but is one of my responsibilities and I've reviewed a lot of plans over the years. One thing to bear in mind is that you're not the designer, and there are multiple ways of doing things you may not like, or may see a better way, but you can't really reject. Nobody likes being told to do something "just because", and it's good practice to start citing specific code violations when you do reject a drawing, or at the very least, be able to cite specific code violations for things you mark up if they question it. But there are always exceptions; if you're an AHJ, use 90.2(C) where prudent. The codes are all about minimizing risk, and if other factors adequately mitigate risk, some code violations are sometimes acceptable. And don't forget there are other codes besides NEC that must also be followed; you need to be looking out for the electrical impact for the other trades, and will have to get with the civils and MEs to review portions of their prints, too. For a lot of this stuff, if you don't catch it or force them to comply, chances are, nobody will!

In time, you'll gain a working relationship with a lot of the engineers you work with, and a quick phone call can go a long way. And I can garuntee you that you will start to recognize specific engineers/draftsmen from their work, regardless of who actually signed the title block. And you'll know who you really only have to give a quick once-over and who gets the 9th degree.

Don't be afraid to reject drawings for lack of information or to ask for clarification- it's in everyone's interest to catch problems at design time as opposed to inspection, and you can't do that if they've just thrown a few lines on paper.

And lastly, sometimes, the drawings are simply WRONG. And I don't mean poor design, I mean, they're not accurately showing the existing condition and are simply wrong. These can be very difficult to catch but can lead to all sorts of problems down the road; if you suspect an error or see a serious pre-existing problem, bring it up to the engineer. And if practical, go to the site and look first-hand.

Re: Plan Review [Re: SteveFehr] #178557
06/04/08 03:35 PM
06/04/08 03:35 PM
HotLine1  Offline

Joined: Apr 2002
Posts: 7,094
Brick, NJ USA
I do Electrical Plan Review in a Twp in NJ. Resi, Comm, Ind., etc. Only for NEC compliance, as required by the NJ UCC (Uniform Construction Code; 5:23 et al))

Errors/omissions are addressed to the design professional for corrections, as required. Either new plans, or verbage that are signed/sealed by the EE/PE/Arch.

Keep in mind that I am an Electrical Sub-Code Lic., and this is the NJ procedure in the Twp.

We also do permit processing (fees), and inspections.

Some projects (Hospitals/Schools/some healthcare facilities, etc. are reviewed by the State DCA)



2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman


Member Spotlight
Bill Addiss
Bill Addiss
Posts: 3,905
Joined: October 2000
Show All Member Profiles 
Top Posters(30 Days)
Admin 5
Popular Topics(Views)
257,220 Are you busy
193,017 Re: Forum
182,694 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.6.1
(Release build 20180101)
Page Time: 0.027s Queries: 15 (0.008s) Memory: 0.9722 MB (Peak: 1.1132 MB) Zlib enabled. Server Time: 2019-07-23 09:53:51 UTC