ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
UL 508A SPACING
by ale348 - 03/29/24 01:09 AM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (ale348), 302 guests, and 14 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#177445 05/02/08 11:40 PM
Joined: Mar 2004
Posts: 391
B
BigJohn Offline OP
Member
I need a hidden deactivation switch for a security system. I'm thinking of using a capacitive proximity sensor hidden behind a thin, non-metallic object that will activate a relay when a hand is passed over the object.

I've never worked with prox. switches before. It appears that most of these switches use a transistor for switching. Are these traditionally digital or analog outputs? Will putting a barrier in front of the switch cause it to constantly conduct some amount of current to the output (maybe in relationship to the distance of the object from the sensor)? Or do most of these have a threshold value for "on" or "off"?

Any help would be much appreciated.

-John

Stay up to Code with the Latest NEC:


>> 2023 NEC & Related Reference & Exam Prep
2023 NEC & Related Reference & Study Guides

Pass Your Exam the FIRST TIME with the Latest NEC & Exam Prep

>> 2020 NEC & Related Reference & Study Guides
 

Joined: Mar 2004
Posts: 947
T
twh Offline
Member
The ones I'm most familiar with are a two-wire switch. Typically, they would provide an input to a PLC, but I've used them to switch a small relay.

Put a barrier in front of it and it will change states very quickly. The distance is adjustable. Metal is quite easy to calibrate, grain is harder to calibrate and needs to be in direct contact, and a hand - I've never had a bin full of hands, but I'm quite sure that I've tripped them with my hand.

Joined: Jul 2004
Posts: 787
L
Member
Most prox switches I have worked with have a sensitivity adjustment. Metal sensing prox switches would work if the user wears a ring or holds keys or a tool up to the surface.

Larry C


Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5