ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Increasing demand factors in residential
by gfretwell - 03/28/24 12:43 AM
Portable generator question
by Steve Miller - 03/19/24 08:50 PM
Do we need grounding?
by NORCAL - 03/19/24 05:11 PM
240V only in a home and NEC?
by dsk - 03/19/24 06:33 AM
Cordless Tools: The Obvious Question
by renosteinke - 03/14/24 08:05 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
2 members (Scott35, gfretwell), 276 guests, and 15 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 4 1 2 3 4
Joined: Apr 2007
Posts: 33
R
RDK Offline OP
Member
is there a control transformer that i can use?

RDK #170394 11/02/07 01:36 AM
Joined: Feb 2003
Posts: 939
F
Member
yeah there are few size you can use but what size starter you have it is #2 or #3 starter size because the reason why i asked here because those size starter they dont use the same size coil they will useally rated in X of VA

but i can give you a rough idea the control transfomer size

120X240 volt primary with 24 volt secondary with 24 volt coil which it very common with alot of the motor starter used this

the typical size useally about 150 VA size for #2 and smaller but for #3 and larger i useally bump up to 200 VA for it due the coil size

or other option you can do is have 240v primary transformer with 120v secondarly volt and use the stock 120 v coil

those two options you can do

if you add the control transformer IMO it will be wise idea to add a fuse to this as well

Merci , Marc


Pas de problme,il marche n'est-ce pas?"(No problem, it works doesn't it?)

Joined: Apr 2007
Posts: 33
R
RDK Offline OP
Member
Thanks whats the cheaper way to go? Also anyone have a drawing for wiring this starter proper

RDK #170397 11/02/07 01:50 AM
Joined: Feb 2003
Posts: 939
F
Member
just a quick question you mention air commpressor right ?? and have the pressure switch right ??

if so i can tell ya the way it connected.

and i think you can get 240 volt coil it somehow cheaper and quicker than try to wired up the transformer set up with 24 volt coil

the 240 volt coil is pretty common item you should have not much issuse getting this one at all

Merci, Marc


Pas de problme,il marche n'est-ce pas?"(No problem, it works doesn't it?)

Joined: Feb 2003
Posts: 939
F
Member
let me add this connection dig.

just hit the word " connection dig."

this is pretty common way of connection but just one warning some connection for coil and O/L's are not the same so use your judgement on this one


Pas de problme,il marche n'est-ce pas?"(No problem, it works doesn't it?)

Joined: Apr 2007
Posts: 33
R
RDK Offline OP
Member
Thanks for the info My Boss Ryan is out at camp for a few more days. So im stuck with this task. Anyone have links to drawings? I just want to make sure i did wire it right

RDK #170400 11/02/07 02:00 AM
Joined: Apr 2007
Posts: 33
R
RDK Offline OP
Member
Everything worked good for a week then the coil was fryed.

RDK #170401 11/02/07 02:12 AM
Joined: Feb 2003
Posts: 939
F
Member
are you talking about this starter ??

the reason why i am doubling checking this one

starter

just take your pointer and click on the word " starter " it will show the image of this one and let me know ASAP

Merci, Marc

how you did oringally wired the coil ?? i am supecting that if you actally have real single phase supply or 3 phase supply it will tell the diffrnece there

and with 10 HP single phase motor that will draw a bit of current IIRC it will be about 50 amp or so @240 volts

Last edited by frenchelectrican; 11/02/07 02:14 AM. Reason: add more info

Pas de problme,il marche n'est-ce pas?"(No problem, it works doesn't it?)

Joined: Apr 2007
Posts: 33
R
RDK Offline OP
Member
Thats the one frenchelectrican and its single phase. I wired from L1 to a switch then to the pressure sw then back to A1.L2 to 96 then 95 to a2. I cant find the paper i drew out.

RDK #170405 11/02/07 09:31 AM
Joined: Apr 2007
Posts: 33
R
RDK Offline OP
Member
eberything worked fine sw controled the coil and when the sw was on the pressure sw worked good

Page 2 of 4 1 2 3 4

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5