ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Safety at heights?
by gfretwell - 04/22/24 10:36 AM
Old low volt E10 sockets - supplier or alternative
by gfretwell - 04/21/24 11:20 AM
Do we need grounding?
by gfretwell - 04/06/24 08:32 PM
UL 508A SPACING
by tortuga - 03/30/24 07:39 PM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
1 members (Scott35), 217 guests, and 10 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Joined: Apr 2006
Posts: 233
K
Member
At least they got the pannel the correct way up "TOP"


der Großvater
Stay up to Code with the Latest NEC:


>> 2023 NEC & Related Reference & Exam Prep
2023 NEC & Related Reference & Study Guides

Pass Your Exam the FIRST TIME with the Latest NEC & Exam Prep

>> 2020 NEC & Related Reference & Study Guides
 

Joined: Nov 2001
Posts: 745
M
Member
I'm a little slow these days. I thought there was something strange about the first picture, then it hit me; The main conductors are missing. I guess this must be a work in progress - assuming the main conductors at one time entered this panel through the large connector shown.
I wonder if the panel cover was missing before the work started.

Pictures of the new installation would be nice.

Mike (mamills)


Joined: Nov 2006
Posts: 348
I
ITO Offline
Member
Ok, that made me laugh.


101° Rx = + /_\
Joined: Oct 2004
Posts: 55
I
Member
Can anyone explain why the person who did this ran two white wires the full length of the cabinet from upper right to lower left, then put a twist connector on the two? Do I see white wires connected to the circuit breakers? I see white wires going to breakers #2 on the left side, top and middle section, and one more to breaker #5 on the right side, top section.

Page 2 of 2 1 2

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5