ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals

>> Home   >> Electrical-Photos   >> Classifieds   >> Subscribe to Newsletter   >> Store  
 

Featured:

 Electrical
 Clearance

 *
 Tools
 *

 Books

 *

 Test Equipment

 

Recent Gallery Topics:
What in Tarnation?
What in Tarnation?
by timmp, September 10
Plumber meets Electrician
Plumber meets Electrician
by timmp, September 10
Who's Online Now
0 members (), 78 guests, and 26 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
#166655 07/25/07 11:09 AM
Joined: May 2003
Posts: 1,157
Member
I went to quote a service Upgrade in a Renovation in an existing Basement suite.
Job was accepted and all the details of what was needed was discussed and proposal signed.
What Happened was their reno contractor was in a rush to insulate the ceiling and he installed recess cans in an area that i was told nothing was needed for electrical. I show up and see 3 cans installed and wired to the existing lighting circuit. He has insulated and put up the vapor barrier. There was no count done on how many outlets are on the circuit. the existing light outlet box was used as a J Box and is only a 1 1/2 deep box and there is 5, 14/2 nm cables entering it..This reno guy is very adamant that this shouldn't of been an issue and I am having a hard time trying to deal with him trying to explain that he isn't allowed to do this. I even showed him a copy of the brochure that the safety branch has out about guys like him and he didn't want to even discuss it.I have taken a permit out on this job.

this guy has to be stopped as this is his career and will continue doing this type of unqualified work.


Tools for Electricians:

Tools for Electricians, Installers & Maintenance Technicians

Joined: Apr 2004
Posts: 812
Member
Quote
What Happened was their reno contractor was in a rush to insulate the ceiling and he installed recess cans in an area that i was told nothing was needed for electrical.


As long as people have a "Get it done now Now NOW! for the least possible cost (in some cases)" attitude, good luck stopping them.

Ian A.

Last edited by Theelectrikid; 07/25/07 12:08 PM.

Is there anyone on board who knows how to fly a plane?
Joined: Oct 2006
Posts: 745
E
Member
Doug:

Since you said that you will have pulled a permit, can't you just let the inspector be the judge on this matter? You can always "gently" point this out to him to make sure he doesn't miss it.


---Ed---

"But the guy at Home Depot said it would work."
Joined: May 2005
Posts: 984
Likes: 2
G
Member
I used Ed's technique on a Commercial job a few years ago.
The EC was going on his merry way over my objections. Then we got to the final, with the City Inspector in tow.
He looked at the job, I mentioned to him that it wasn't something that I thought was done right.
He said (and I quote) "Nice Catch" and made the EC rip it out and do it right.

A side benefit was that I had no problems with anyone on the site blowing off my comments from that day forward, knowing that they just might need to do it over on their own dime.


Ghost307
Joined: May 2003
Posts: 1,157
Member
Well I hope this is resolved the reno contractor removed his cans and put the original fixture back

Joined: Apr 2004
Posts: 812
Member
Originally Posted by dougwells
Well I hope this is resolved the reno contractor removed his cans and put the original fixture back


smile Score one: Electrician


Is there anyone on board who knows how to fly a plane?

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5