ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat Box
Recent Posts
Kichler Lighting Recalls Pendant Lights
by Admin - 09/18/19 08:47 PM
Does a 'normal 3ph-AC motor' include capacitors?
by gfretwell - 09/18/19 01:20 AM
Another weird NEC code question on Feeder Taps
by gfretwell - 09/18/19 01:14 AM
NEC 2017_392.22(B)(1)(b)
_What's the smallest width

by Bill Addiss - 09/17/19 07:13 PM
NEC Question_Cord-&-Plug EGC shorter then Neutral
by pcsailor - 09/16/19 05:26 AM
New in the Gallery:
What is this for?
Plug terminals
Who's Online Now
2 registered members (Admin, gfretwell), 11 guests, and 11 spiders.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Panel Location #13686 09/09/02 10:39 PM
Joined: Feb 2002
Posts: 5
B
Boomer Offline OP
Junior Member
Hope for response in other areas. When rewiring older homes are panels allowed to be put back in their original locations with a washer or dryer in front of the panel? Or in other locations like stairways or rooms with less than 36in. of clearance in front of the panel? Thanks for any response in other areas. Boomer

Work Gear for Electricians and the Trades
Re: Panel Location #13687 09/10/02 06:43 AM
Joined: Mar 2001
Posts: 2,056
R
Redsy Offline
Member
My experience in suburban Phila., PA has been that locations that are now in violation (even closets) are grandfathered, and allowed to remain. It would usually be a much more expensive project for the homeowner, otherwise.

Re: Panel Location #13688 09/10/02 07:11 AM
Joined: May 2001
Posts: 36
C
C.Urch Offline
Member
All inspectors here require the panel to be moved to a conforming location if the old, non conforming panel is replaced. Circuits may be added to a non conforming panel provided there is sufficient space but if the service needs to be upgraded, or the point of entry of the service feeder is changed, the entire service (including replacement of 2 conductor to 3 conductor cable) must meet current code.

Re: Panel Location #13689 09/12/02 11:17 PM
Joined: Apr 2001
Posts: 518
J
John Steinke Offline
Member
I almost always find a new place for the new panel; new panels rarely fit in the same place as the old panel.

Re: Panel Location #13690 09/15/02 11:18 AM
Joined: Sep 2002
Posts: 131
T
tsolanto Offline
Member
Here in Long Island if a panel is in a closet we either have to move it or make the closet into two closets. 1 a clothes closet and one for the panel. Must keep the 3 foot rule in front of live parts.

Re: Panel Location #13691 09/15/02 12:28 PM
Joined: Feb 2002
Posts: 2,233
H
harold endean Offline
Member
Here in NJ I would love for you to find a new spot for the panel, however under NJ rehab code the panel can go back in the same place. I tell people to think of themselves when installing things. You might be the one who has to work on the panel/box the next time. Try to make it easier for maintenece on the next person.


Featured:

2020 National Electrical Code
2020 National Electrical
Code (NEC)

* * * * * * *

2017 Master Electrician Exam Preparation Combos
2017 NEC Electrician
Exam Prep Combos:
Master / Journeyman

 

Member Spotlight
Bill Addiss
Bill Addiss
NY, USA
Posts: 3,923
Joined: October 2000
Show All Member Profiles 
Top Posters(30 Days)
Admin 6
Popular Topics(Views)
258,626 Are you busy
194,220 Re: Forum
183,690 Need opinion
Powered by UBB.threads™ PHP Forum Software 7.7.3