I'm an electrical engineer with a few years experience in power/industrial design-build. I learn so much from the articles and forums on this site. In my time I've been priviledged to have worked with some knowledgeable and well rounded electricians who remind me a lot of members on this site. Our professions are rarely well understood by the general public and unfortunately the only press we seem to get is about the mishaps of the few while they ignore the great work of many. Keep up the good work!
Re: Breaking the Ice ... Welcome to new Members !#12358 08/08/0209:52 AM08/08/0209:52 AM
I have been a member for a while, but I don't post very often. I am not an electrician, but I do live in a house with an electrical system
I enjoy reading about the various issues that come up here and I especially like the Violation Photos and Photos for Discussion. I should have take some photos of some of the electrical work ( done by previous homeowner ) in our house!
When I do have to have an electrician out to do some work, I feel much better informed having read some of the information here.
Re: Breaking the Ice ... Welcome to new Members !#12359 08/08/0210:38 AM08/08/0210:38 AM
Hello, I'm a small 'e' mechanical engineer (no PE cert.) working in the medical products field as a manufacturing engineer. I'm known here as "cajun" and I ask too many questions.
I'll be a homeowner soon (well, the bank will, and I'll be paying them for it...) and I'm curious about what all I'll be dealing with when I get one, and get a lot out of the "bad things DIY 'electricians' do" pictures, threads, etc. and from these I hope to recognize a potential problem when I see one so I can get a professional in when needed. I'm also curious about electrical/electronic stuff in general, hence the too many questions... later, -cajun
Yes, I'm on Company Time. How else do you think I get a DSL connection?
Re: Breaking the Ice ... Welcome to new Members !#12362 08/09/0210:36 AM08/09/0210:36 AM
Hi all - I am English and a owner of a mobile advertising company in Cyprus, with no knowledge of electic's but often need to know things, so here i am guys, and thanks to some members who have already replied to my first post about external lighting for my advertising trucks (see forum).
Re: Breaking the Ice ... Welcome to new Members !#12364 08/09/0211:09 AM08/09/0211:09 AM
I would also like to welcome all new members. I am an electrician at a factory that makes toolboxes. I am also into electronics and PLC's. There is much good info to be had here so jump in the pool and splash around. The water is the right temp!
Re: Breaking the Ice ... Welcome to new Members !#12365 08/09/0212:19 PM08/09/0212:19 PM