ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals
ECN Shout Chat
ShoutChat
Recent Posts
Safety at heights?
by gfretwell - 04/23/24 03:03 PM
Old low volt E10 sockets - supplier or alternative
by gfretwell - 04/21/24 11:20 AM
Do we need grounding?
by gfretwell - 04/06/24 08:32 PM
UL 508A SPACING
by tortuga - 03/30/24 07:39 PM
Increasing demand factors in residential
by tortuga - 03/28/24 05:57 PM
New in the Gallery:
This is a new one
This is a new one
by timmp, September 24
Few pics I found
Few pics I found
by timmp, August 15
Who's Online Now
0 members (), 228 guests, and 10 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 4 1 2 3 4
#108413 03/28/04 08:05 PM
Joined: Aug 2003
Posts: 1,374
R
Ryan_J Offline OP
Moderator
Sometimes violations are hard to find, and some times you just start laughing as soon as you open the door.....

[Linked Image]


I'll post some more pics of this job when I get more time.


Ryan Jackson,
Salt Lake City
Stay up to Code with the Latest NEC:


>> 2023 NEC & Related Reference & Exam Prep
2023 NEC & Related Reference & Study Guides

Pass Your Exam the FIRST TIME with the Latest NEC & Exam Prep

>> 2020 NEC & Related Reference & Study Guides
 

#108414 03/28/04 08:15 PM
Joined: Jan 2004
Posts: 615
J
Member
laughing.........

#108415 03/28/04 08:15 PM
Joined: Jan 2003
Posts: 4,391
I
Moderator
Ryan did you set this up in your garage for us to have a good laugh. [Linked Image]

This is a classic, nail plates what more do you want. [Linked Image]


Bob Badger
Construction & Maintenance Electrician
Massachusetts
#108416 03/28/04 08:20 PM
Joined: Aug 2003
Posts: 1,374
R
Ryan_J Offline OP
Moderator
Wow: two posts in under two minutes!!!

I'll have to show you the rest...you'll die. Nuetrals on hots, hots on nuetrals, bonding on the load side ( A real fire hazard in this case...think about it), Schedule 40 lateral riser, no bonds on metal raceway with GEC, etc...

Heres the best part...they used a bond bushing on the panel. What exactly are tehy bonding here...the locknut?

I'll hopefully get some more up tonight or tommorrow.


Ryan Jackson,
Salt Lake City
#108417 03/28/04 08:32 PM
Joined: Mar 2004
Posts: 391
B
Member
They bond conduit that doesn't exist, and they nail-plate individual conductors that shouldn't be there to begin with, this all seems just a little bit backwards....

Ryan_J,

What do you mean by "bonding on the load side"?

-John

[This message has been edited by BigJohn (edited 03-28-2004).]

#108418 03/28/04 08:39 PM
Joined: Dec 2000
Posts: 4,294
Member
Cool!
Certainly did the wrong thing in a very right way.

Ryan'
I'm curious. What did you cite as "the" violation?

#108419 03/28/04 10:05 PM
Joined: Nov 2002
Posts: 794
Likes: 3
W
Member
Don't you need porcelien knobs and tubes here? [Linked Image]

#108420 03/28/04 10:06 PM
Joined: Dec 2003
Posts: 59
B
Member
hay is that knob and tube wiring LOL

#108421 03/28/04 10:31 PM
Joined: Jun 2003
Posts: 681
P
Member
Ryan
Please tell us this was not installed by an electrician. Jeez, I am really perplexed as to how this kind of installation can really be done. It is a sad state of how things are if that is a licensed electrician's work.

Pierre


Pierre Belarge
#108422 03/28/04 10:37 PM
Joined: Nov 2002
Posts: 558
G
Member
Pierre,If you'd come to my part of Ga. I could show you lots of stuff like this done by "Licensed" electricians.

If I can figure out how to work this new digital camera,I'll send Bill some pics.

Page 1 of 4 1 2 3 4

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5