ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals

>> Home   >> Electrical-Photos   >> Classifieds   >> Subscribe to Newsletter   >> Store  
 

Featured:

 Electrical
 Clearance

 *
 Tools
 *

 Books

 *

 Test Equipment

 

Recent Gallery Topics:
What in Tarnation?
What in Tarnation?
by timmp, September 10
Plumber meets Electrician
Plumber meets Electrician
by timmp, September 10
Who's Online Now
0 members (), 288 guests, and 12 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 3 of 3 1 2 3
Joined: Feb 2003
Posts: 138
W
Member
Hi Joe,

Here are some OSHA references for portable ladders.

Quote
1926.1053(b)(13)

The top or top step of a stepladder shall not be used as a step.

1926.1053(b)(4)

Ladders shall be used only for the purpose for which they were designed.

When reading the manufacturer's instructions attached to a portable ladder, you will see that it says something about "not standing above this step" which is the step before the "top step".

Quote

1926.1060(a)
The employer shall provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards.

Hope this helps!
Dave

[This message has been edited by WebSparky (edited 02-25-2003).]


Dave
Insulated Tools for Electricians

Insulated Tools for Electricians, Installers & Maintenance Technicians

Joined: Apr 2002
Posts: 7,413
Likes: 9
Member
OK, so a 6' ladder is really 5', and a 12' ladder is 11' etc.
Like a few said, "he who is without sin.."
well, it ain't me, or my guys.
John


John
Joined: Oct 2002
Posts: 67
C
Member
Hotline1:
A 6' ladder is really 4'!?!

Look at the label on the ladder: it will state the highest standing level: about 3'10" for a 6' ladder.

[This message has been edited by cubby964 (edited 02-26-2003).]

Joined: Oct 2000
Posts: 2,749
Member
Thanks for all of the valuable information. I have a directory of many images showing the same situation where the top step was used!!


Joe Tedesco, NEC Consultant
Page 3 of 3 1 2 3

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.5