240Volt Loads without neutral

ECN Shout Chat

1 members (Scott35), 235 guests, and 27 robots.

Key: Admin, Global Mod, Mod

Print Thread

Rate Thread

#55261 08/23/05 05:50 PM

Joined: Nov 2004

Posts: 138

C

Clydesdale Offline

OP

Member

How come some 240V single phase loads don't require a neutral; just 2 hot legs and a ground?

Tools for Electricians:

Entire Thread
Subject	Posted By	Posted
240Volt Loads without neutral	Clydesdale	08/23/05 09:50 PM
Re: 240Volt Loads without neutral	Sandro	08/23/05 09:58 PM
Re: 240Volt Loads without neutral	Clydesdale	08/23/05 11:40 PM
Re: 240Volt Loads without neutral	Attic Rat	08/24/05 12:18 AM
Re: 240Volt Loads without neutral	renosteinke	08/24/05 01:30 AM
Re: 240Volt Loads without neutral	gfretwell	08/24/05 01:32 AM
Re: 240Volt Loads without neutral	sierra electrician	08/24/05 02:20 AM
Re: 240Volt Loads without neutral	Clydesdale	08/24/05 03:39 AM
Re: 240Volt Loads without neutral	Larry Fine	08/25/05 05:52 PM
Re: 240Volt Loads without neutral	foestauf	08/26/05 11:33 PM
Re: 240Volt Loads without neutral	Clydesdale	08/31/05 09:26 PM
Re: 240Volt Loads without neutral	Dnkldorf	08/31/05 09:58 PM
Re: 240Volt Loads without neutral	Clydesdale	09/01/05 01:53 AM
Re: 240Volt Loads without neutral	Clydesdale	09/01/05 02:24 AM
Re: 240Volt Loads without neutral	John Crighton	09/01/05 05:19 PM
Re: 240Volt Loads without neutral	Dnkldorf	09/01/05 05:28 PM

Link Copied to Clipboard

Featured:

lil suzi
Midwest

Posts: 57
Joined: August 2003

ECN Forum Forums General Topics of the Trade General Discussion Area 240Volt Loads without neutral