Basic RG-6 system for TV. All terminate at basement board.
1. 4 from DirecTV dish. (1-1/4 PVC UG).
2. 2 each routed to MBR, BR2, BR3, BR4, BR5, Library. (Required for HDTV).
3. 4 to Family Room. (Required for HDTV/TIVO and second TIVO).
4. 1 to Kitchen. (Not HDTV).
5. 1 to Garage. (Not HDTV).
6. 1 to Exercise Room. (Not HDTV).
7. 1 from OTA antenna in west attic. (Required for OTA HDTV).
Incoming to 4x8 powered multi-switch.
Load side feeds 2 4x8 powered multi’s and cascades to 1 more 4x8 multi.
Diplexers not used as unsuitable for optimum signal.
Splitters not used for same reason.
I think that my mixing the systems in my post possibly indicated a system that is complicated and expensive. It’s not difficult or cost prohibitive. I’ll try to fill in the other systems one by one .
Rowdy
