is there a good stripper for 12/3 and 14/3 romex?

ECN Shout Chat

0 members (), 394 guests, and 18 robots.

Key: Admin, Global Mod, Mod

Print Thread

Rate Thread

#35743 03/21/04 12:58 AM

Joined: Feb 2004

Posts: 5

Z

OP

Junior Member

the inner wires twist together and it is kinda hard to cut straight on the outer sheathing.

Tools for Electricians:

Entire Thread
Subject	Posted By	Posted
is there a good stripper for 12/3 and 14/3 romex?	zappy	03/21/04 04:34 AM
Re: is there a good stripper for 12/3 and 14/3 romex?	CRM	03/21/04 04:48 AM
Re: is there a good stripper for 12/3 and 14/3 romex?	CRW	03/21/04 04:51 AM
Re: is there a good stripper for 12/3 and 14/3 romex?	zappy	03/21/04 04:54 AM
Re: is there a good stripper for 12/3 and 14/3 romex?	zappy	03/21/04 04:58 AM
Re: is there a good stripper for 12/3 and 14/3 romex?	Jim M	03/21/04 04:44 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	stamcon	03/21/04 06:22 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	Jim M	03/21/04 07:13 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	Redsy	03/21/04 10:19 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	SJT	03/22/04 08:10 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	Mike Wescoatt	03/22/04 09:02 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	CTwireman	03/22/04 10:08 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	Joey D	03/22/04 10:22 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	Attic Rat	03/23/04 01:35 AM
Re: is there a good stripper for 12/3 and 14/3 romex?	SJT	03/24/04 07:37 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	wiremann-54270	03/24/04 11:20 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	rlrct	03/24/04 11:39 PM
Re: is there a good stripper for 12/3 and 14/3 romex?	NJwirenut	03/25/04 01:06 AM