Originally posted by sparky:I know the exception you are referring to, however, I believe this pertains to a special type of device that requires no box. I saw a picture of them once. You leave a loop of rx sticking out of the wall and use a special tool to install the switch or receptacle onto the cable. I think I saw it in a code handbook sometime, but never in the flesh.
Redsy,
there is for every wiring method, 336-18 asks to secure 12" before box entry, so we just move the staple closer to the box and take advantage of this.
Of interest, kinda goes with Joe's response would be 336-12 EX #2, which is actually asking for a 'loop' .
![[Linked Image]](https://www.electrical-contractor.net/ubb/smile.gif)
