Geez look at all that stainless steel!
~Matt
Yeah mate,
If anyone ever wants to get into fitting these sheds, expect to have good TIG welding skills.
I thought I was a good TIG welder before one of the fitters asked me to weld up a 4" 90 degree bend to a straight length of pipe, down in a pit full of water, the filler rod kept getting caught on the edge of the pit and turning the thing was a real nuisance, as the straight pipe had been run through a length of 6" PVC as a ducting when the concrete floor was poured.
At least I had water to wash the pickling acid off the weld, which is usually a rarity in a new shed, I just rung my overalls out.
