OK folks, sorry to hold out on you, I've been flat out at work lately.
Here are a few pics from the dairy sheds, I've been working in lately, the first lot are from a brand new shed, we started back in April:

First up is a pic of the Hot water system, with 2 1000 litre cylinders, these are rated at 15kW each:

[Linked Image]

Next, is the milk filters and plate cooler, these filter and cool the warm milk before it heads to the 30,000 litre silo on the other side of the wall:

[Linked Image]

In this pic, we have the pump room, with the vacuum interceptor, vacuum blower and motor (18kW), compressor for the milk recovery system, controllers and a VSD, (yeah, that pipe in the back IS crooked, it's called fall):

[Linked Image]

The pad-mounted transformer:

[Linked Image]

Name-plate from the above transformer(how is expulsion spelt?):

[Linked Image]

The temporary supply, it poured with rain the day I installed this:

[Linked Image]

Finally, here is the sunrise, looking out over the un-finished yards (wood not included):

[Linked Image]




I have a tonne of other pics, I need to have a good sort-out before I post some pics of the rotary platform and other bits and pieces.

Any questions?, go right ahead!