FireLite Miniscan 112 panel located in a common stairway at front entrance first floor. Panel is a sub panel to another panel in a common stairway in another front entrance first floor of the building. Fire Department says can keep existing panel because we are complete remodel of existing pizza shop, one tenant in a multi tennant (comm.residential) building with 4 comm. and 8 residential units. Gut to studs of this tennant only.
System sensor says can use one of their 4wire smokes with a module to connect to the panel. Modules is a 2w-MOD2 Loop Test/Maintenance Module smoke is a 4WT-B
Will I be able to replace the horn units with Horn/Strobes?
Would anyone be able to give me some Technical answers or
contact numbers?
Thanks in advance.
Hi Bob, Welcome to the forums.
Right off the bat your question is confusing.
We need particulars. Main panel-sub panel- etc. your talking life safety here, not power.
I assume. the Mini-Scan 112 is covering the commercial spaces.
Reasoning being it is only a 4 zone panel.4 Tennants.
Is this correct?
The "main" panel is covering the apartment units.
Is this correct?
Your doing this job in Watertown Ma. Correct?
Many, many things to consider. I'll go on, but only if your there.
The other system is covering the residencses.
Is this correct?
