It looks a little large in overall diameter for 0.75mm compared to the reel, but I'll admit it's hard to judge in the photo, so it could be.
Even if it were the intermediate 1.0 sq. mm size it wouldn't be too hard to overload.
1.0 sq. mm = #17 approx.
0.75 sq. mm is between #18 and #19 AWG.
Edited to add:The following link is to a conversion chart in the Technical reference area for those not familiar with European cable sizes:
https://www.electrical-contractor.net/ubb/Forum15/HTML/000087.html [This message has been edited by pauluk (edited 09-26-2005).]
