Just wanted to thank everyone for the replies!
Had seen this on many H.V. Transmission circuits over the years, and finally I know what to call it!
[Linked Image]

What's odd is the only Transposition method I have seen is with the two circuits "turning" in the same direction -
i.e.:
"A", "B" & "C"
transpose to:
"C", "A" & "B"
on both circuits on the same pole
(like shown in the image).
After reading Bjarney's message, it's funny that the rotation does not spin different between the two circuits. Makes sense to me having them spin in opposing directions.

The image I posted here is a two circuit 3Ø 3W setup, and judging from the size of the Insulators, the Voltage must be 66KV.
It runs through an easement - along with another 66KV 2 circuit setup and a two circuit 138KV setup; from an SCE yard, through the City of Anaheim's yard, to another SCE yard.
This image was taken apx. 1.5 miles Northwest of Disneyland.

Anyhow, thanks again everyone for the replies!

Scott35

Scott " 35 " Thompson
Just Say NO To Green Eggs And Ham!