JCL
the phase colors are red black blue. Neutral is white or natural grey. Bonding conductor is green or green with a yellow stripe.
Control colors are not specified exept that only grounded conductors may be white or natural grey. Only grounds may be green and may not be current carrying conductors.
Next you need to have your product built to a Canadian standard and CSA is a good source for those standards. They have offices in the US. UL has a Canadian branch CUL and any ul office in the states can help you meet product standards. It is actually against the law here to sell or offer for sale any electrical product that is not "approved" as evidenced by the required sticker. Approval labels must be applied in the factory. If you are offering a single or one off item there are special inspection services offered in each province and is also available through CSA, UL, ETL and other approval/testing agencies in the US and Canada. If you are in Europe, many of these agencies have international offices.
The internal wiring of products is not governed by the Electrical code part 1 which is an installation code. Part 2 Code is for manufacturers and is governed by the Canadian Standards Association. The label serves as a certification that a product meets part 2 standards and is safe for its approved application.
Good luck.
