ECN Electrical Forum - Discussion Forums for Electricians, Inspectors and Related Professionals

>> Home   >> Electrical-Photos   >> Classifieds   >> Subscribe to Newsletter   >> Store  
 

Advertisement:-Left
Recent Gallery Topics:
What in Tarnation?
What in Tarnation?
by timmp, September 10
Plumber meets Electrician
Plumber meets Electrician
by timmp, September 10
Who's Online Now
0 members (), 440 guests, and 29 robots.
Key: Admin, Global Mod, Mod
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 3 1 2 3
#34606 02/17/04 09:08 PM
Joined: May 2002
Posts: 1,716
R
Member
GJ, sorry, it's PVC coated ridgid.

Roger

Horizontal Ad
#34607 02/17/04 10:18 PM
Joined: Apr 2002
Posts: 2,527
B
Moderator

#34608 02/17/04 10:35 PM
Joined: May 2002
Posts: 1,716
R
Member
Thanks Bjarney. [Linked Image]

Roger

#34609 02/17/04 10:36 PM
Joined: Mar 2002
Posts: 582
R
Ron Offline
Member
If I recall corectly, RNC is CPVC. Which is lower smoke emmision than PVC.


Ron
#34610 02/17/04 11:46 PM
Joined: Apr 2001
Posts: 507
G
Member
"GJ, sorry, it's PVC coated ridgid.
Roger"

No need to be sorry. I learned something new, so the day wasn't a complete loss.

GJ

#34611 02/18/04 12:01 AM
Joined: Jun 2001
Posts: 642
N
Member
Have used PVC conduit in sweveral different type of plants all of which have somewhat nasty enviromental work areas. If the are large temp changes even a lot of expansion joints will not keep the install from looking bad in a couple of years. But it's a lot easier and much much cheaper than Robroy. If a customer needs robroy or other PVC coated rigid, prepare them for severe sticker shock. Also get a good count of couplings, connectors, and other hard ware. It's all expensive and an extra cost. You will need special tools to install, cut and thread it also
I also hate that stuff


ed
#34612 02/18/04 05:47 AM
Joined: Jan 2003
Posts: 4,391
I
Moderator
Quote
If a customer needs robroy or other PVC coated rigid, prepare them for severe sticker shock. Also get a good count of couplings, connectors, and other hard ware. It's all expensive and an extra cost.

That is very true, be ready to provide CPR when you give the customer the price.

One of our guys did a job in a hazardous location with PVC coated RMC.

What a pain in the rear!

Short an LB or a junction box, the job stops for days to weeks to get the expensive parts out to the job, not shelf items at any supply houses we deal with.

Even PVC coated 1 hole clips with stand offs had lead time and a high price.

I installed a 480 volt 30 amp 3 phase PVC coated hazardous location receptacle and matching cord cap, they told me just that was over $2,000.

The receptacle had a switch in it that killed a contactor outside the hazardous area when you started to remove the cord cap.

I like EMT and MC. [Linked Image]


Bob Badger
Construction & Maintenance Electrician
Massachusetts
Horizontal Ad
#34613 02/19/04 02:04 AM
Joined: Aug 2002
Posts: 141
E
Member
Don't most non-wool carpets give off the same fumes?

#34614 02/19/04 04:34 PM
Joined: Dec 2003
Posts: 751
E
Member
I hope not.


Earl
#34615 02/19/04 04:50 PM
Joined: Nov 2000
Posts: 2,148
R
Member
Almost all of the furnishings used in a house give off fumes that are every bit as toxic as the nonmetallic conduit fumes. In my opinion, in most types of buildings, the toxic fumes given off by burning building materials are so much less than those given off by the burning contents and furnishings in the structure that the fumes from nonmetallic conduit or plumbing piping are almost insignificant. By the way, wool produces cyanide gas when it burns.
Don


Don(resqcapt19)
Page 2 of 3 1 2 3

Link Copied to Clipboard
Featured:

 Electrical
 Clearance

 *
 Tools
 *

 Books

 *

 Test Equipment

 

Advertisement:-Right
Member Spotlight
Theelectrikid
Theelectrikid
Levittown, PA
Posts: 812
Joined: April 2004
Top Posters(30 Days)
Trumpy 4
triple 3
dsk 1
Popular Topics(Views)
520,291 Are you busy
402,230 Re: Forum
375,229 Need opinion
New Page 2
Powered by UBB.threads™ PHP Forum Software 7.7.5